Bay Area/ Nor Cal Community Chat Thread
II SOCIETY
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Originally Posted by LionZoo
Glad you guys had fun. Master B8s is an awesome name.
Any of you guys have experience removing your center console? I'm thinking about doing it the weekend of the 10th to try to see whether there's a tear in my shiftboot since I get gear oil smell in my interior after driving. I wouldn't mind some help.
Any of you guys have experience removing your center console? I'm thinking about doing it the weekend of the 10th to try to see whether there's a tear in my shiftboot since I get gear oil smell in my interior after driving. I wouldn't mind some help.
I do it, a few times a week. I expreiment with it a lot. All you gotta do is:
a) Unscrew you shfit ****
b) Slide back the center console/cupholder/elbow rest top
c) Grab the leather shift boot and pull up
It'll pop right out. Then you'll need a phillips head screwdriver if you want to remove the ashtray unit.
Originally Posted by tournapart
were the:
....bitch
Nor Cal
Master B8's
Master B8's
....bitch
Hoo'yah!
Everyone else,
Can I get them measurments, though?
Last edited by Phantom Menace; Feb 3, 2007 at 09:40 PM.
Rx8_4eVeR
Joined: Nov 2006
Posts: 852
Likes: 0
From: San Jose, Cali
Originally Posted by SlipNslide1.3
The pictures are posted. Way better than last weeks pics. I realized I didn't get any pics of our hispanic friends. 
Im glad we had a great turn out. I look forward to every Friday. It is so much fun. I know somoe of our humor is a bit nasty and silly but Hey HC is the the mato for our club The "Master Bay 8's" LOL
https://www.rx8club.com/showthread.p...=1#post1722335
Im glad we had a great turn out. I look forward to every Friday. It is so much fun. I know somoe of our humor is a bit nasty and silly but Hey HC is the the mato for our club The "Master Bay 8's" LOLhttps://www.rx8club.com/showthread.p...=1#post1722335
Rx8_4eVeR
Joined: Nov 2006
Posts: 852
Likes: 0
From: San Jose, Cali
Originally Posted by tournapart
I went for a drive today, took some pics, nowhere near adams skill or quality but i like them
oh yeah, and i put the clear corners in today they look sweet
oh yeah, and i put the clear corners in today they look sweet
Originally Posted by Ever Hernandez
Cool pix man, where's that at
Its at the top(north end) of bear creek road, about a mile in from alhanbra valley road, im sure none of you guys know where this is, its in north/east bay, its basically my backyard
hukbong himpapawid
Joined: Aug 2006
Posts: 689
Likes: 1
From: Schwedelbach, Germany
Originally Posted by Phantom Menace
DJ,
What's up brother?! Missed you at the meet last night. Yeah, I got my springs/shocks in...I appreciate your offer though. Maybe on my next project--flywheel--if you're still down? As for the TPMS...its weird. Maybe its the cold weather but each time I check it the pressure reading is different. Before we left UC to go back to DC, it was at 35 all around. Then, when I got back to DC, it was 38! So, I kept letting air out until it was 32.5 all around. I'm going to try and check it again in a minute. The thing is, it's usually fine for about 15 minutes then it goes bliky-blink?! I found a reset method on here and will be trying that as well.
Hit me up sometime brah.
What's up brother?! Missed you at the meet last night. Yeah, I got my springs/shocks in...I appreciate your offer though. Maybe on my next project--flywheel--if you're still down? As for the TPMS...its weird. Maybe its the cold weather but each time I check it the pressure reading is different. Before we left UC to go back to DC, it was at 35 all around. Then, when I got back to DC, it was 38! So, I kept letting air out until it was 32.5 all around. I'm going to try and check it again in a minute. The thing is, it's usually fine for about 15 minutes then it goes bliky-blink?! I found a reset method on here and will be trying that as well.
Hit me up sometime brah.
II SOCIETY
Joined: Nov 2006
Posts: 1,077
Likes: 0
From: The Bay Area
Originally Posted by d j
yeah, I ended up working extended hours on my day off, but I'm glad you got the springs on... I still have to install my flywheel/clutch, I'll let you know how that one goes. did the sensor reset work for you?
Yeah. Weird thing. I waited till the tire was cool then put 32lbs all around. All I had to do was turn the key on the "on" position, then back off and waited 15min. Then, I drove around for 15-20min past 35mph.
Let me know how that clutch/flywheel install goes? If you need an extra, albiet somewhat incompetent, hand. I got your back! You have my cell #, yes? Because when I'm ready to do mine...I know I'ma hit you up! LOL.
Originally Posted by Ever Hernandez
I made this today really quick before I logged on, just wanted to share it with everyone. I wonder how I should put "Master bay 8's" in there LOL 
You sick bastard! Still trying to "outdo" me, huh? j/p. Looks good, main! But--uh. I think it's just Master B8's now?!
You going Friday? Hit me up.
Last edited by Phantom Menace; Feb 4, 2007 at 12:38 AM.
Car Enthusiast
Joined: Jan 2007
Posts: 56
Likes: 0
From: Bay Area
Master B8's doesn't really fit. "Master Bay 8's" sounds better because we are in the bay area. Master B8's and Master Bay 8's is still pronounced the same.
Sach, Very nice pictures man. i wish you lived closer.
Sach, Very nice pictures man. i wish you lived closer.
Car Enthusiast
Joined: Jan 2007
Posts: 56
Likes: 0
From: Bay Area
Originally Posted by Ever Hernandez
I made this today really quick before I logged on, just wanted to share it with everyone. I wonder how I should put "Master bay 8's" in there LOL
Car Enthusiast
Joined: Jan 2007
Posts: 56
Likes: 0
From: Bay Area
Nice Sig Phantom, you need some Text in there. If I have time tomorrow I may make you a sig with that pic. I too want to see you as a regular at the weekly meets. I know weekly is hard to do every week but just do what you can.
Niel, I know you will be fiening for your car. Look me up at work. Im in the IT department.
Niel, I know you will be fiening for your car.
Look me up at work. Im in the IT department.
Rx8_4eVeR
Joined: Nov 2006
Posts: 852
Likes: 0
From: San Jose, Cali
[QUOTE=SlipNslide1.3]Looks sweet. We need to get a sticker printed. [/QUOT
I guess we're the ones that don't sleep much
LOl That would be great, just a sketch for now just tryin' to gatter some input from everyone if everyone else think is a go we could present it to the dudes from polak maybe
Viva los
Krispy Kreme Parking Lot Hanger Outers
The Master Bay 8's or Master B8's
or whatever else we end up callin' ourselves
[/QUOTI guess we're the ones that don't sleep much
LOl That would be great, just a sketch for now just tryin' to gatter some input from everyone if everyone else think is a go we could present it to the dudes from polak maybeViva los
Krispy Kreme Parking Lot Hanger Outers
The Master Bay 8's or Master B8's
or whatever else we end up callin' ourselves
