RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   West RX-8 Forum (https://www.rx8club.com/west-rx-8-forum-34/)
-   -   25$ dyno day socal 805! 3/27/11 (https://www.rx8club.com/west-rx-8-forum-34/25%24-dyno-day-socal-805-3-27-11-a-213533/)

broda805 03-18-2011 01:24 AM

25$ dyno day socal 805! 3/27/11
 
1 Attachment(s)
25$ dyno day in the 805!

3/27/11 10am

helping my buddy start up his shop so hes throwing a dyno day and im spreading the word hes just got a brand new dyno

Need at least 10 cars for this price so bring your buddies!


the dyno is a DynoJet 224xLC
and is rated to 200MPH and 2000 HP
it can measure HP and Torque at the wheels
it has many different types of sensors along with the dyno data acquisition.
here is a list of some of the major ones:
-Wide Band
-Various pressure sensors /boost, vacuum, oil pressure/
-OBD2 Data Stream Interface /it allows recording majority of the OBD2 data stream during the dyno runs/
-Type K thermocouples
-Custom 0-5 volt sensor inputs /up to four can be configured/

From Tom:

the engine RPM is usually obtainable on my dyno 99.99% of the time ither through OBD2 port or Inductive Coil Clip.
i can assure you that tire slipage on my dyno is very reare and i make many steps to prevent it. typically slippage is not an issue untill 800 HP at the wheels and above range.

i will require all participants to sign a liability release form and making a $25 cash payment prior to "loading" a car on the dyno.

there are couple of car seafety rules i always follow:
-cars to be tested must have tires in good condition and fully aired up to recomended operating pressure.
-if during any time a car showes evidance of vibration in the drive train /like bad CV or universal joint/ i will abort testing it.
those seafety rules are there so i can avoid damage to the car and the dyno equipement.
i have more than 8 years of experiance in operating chassis dyno equipement and tuning cars and in all that time i never "lost" a car on the dyno due to my own fault or recklesness and i will do my best to maintain that record.

that will include two dyno pulls/tests
they would get dyno print outs including following data:
power at the wheels
torque at the wheels /if engine RPM is obtainable/
engine RPM /if obtainable/
speed at the wheels
manifold pressure /boost or vacuum on non turbo cars/
Wide band reading /using tail pipe sniffer attachment/

Attachment 247554

has some low profile ramps so it should accommodate lowered cars without any issues

Advanced Product Engineering
19 N. Aviador St. Unit F
Camarillo Ca. 93010
Tel 951-897-0678

Twiztog43 03-18-2011 11:23 AM

Seems like a good deal!

And it's right next to the premium outlets! I'll see if some of the SFV guys want to go

broda805 03-18-2011 11:49 AM


Originally Posted by Twiztog43 (Post 3917164)
Seems like a good deal!

And it's right next to the premium outlets! I'll see if some of the SFV guys want to go

yeah its really close get off on los posas over the bridge then right toward home depot and its about a block away

gregs 03-18-2011 06:18 PM

I'll be there! Should be a good day.

Razz1 03-19-2011 12:41 PM

Post a address and link to the map on google.

broda805 03-19-2011 01:11 PM


Originally Posted by Razz1 (Post 3918004)
Post a address and link to the map on google.

Advanced Product Engineering
19 N. Aviador St. Unit F
Camarillo Ca. 93010
Tel 951-897-0678

http://maps.google.com/maps?f=q&sour...nia+93010&z=16

ZOOM-I-DO 03-19-2011 01:51 PM


Originally Posted by gregs (Post 3917486)
I'll be there! Should be a good day.

You going to Dyno Greg?

It would be interesting to see the diff between SR MotorCars Dyno and this one?

What say you?

Doug

tiltmode43 03-19-2011 01:59 PM

This is a great opportunity and I would be in to go but...


...This is posted on how many forums now? It is a one day event with a very low price, how many vehicles will he be able to dyno in one day? I really would rather not go, wait around, and not be able to have my car dyno'd.

If there is some way to verify a car will make the cut, I will likely be in :icon_tup:

broda805 03-19-2011 11:13 PM

posted this in a few forums but its the 805 the car community here isnt that big so im not sure how many people are going to show up

those of you who are driving from afar may want to setup an appointment dont want you guys to drive all this way and wait around all day shoot me an email broda805@gmail.com 10am-5pm send: name, car, time

11-2pm slots filled

RXZOOOM 03-21-2011 04:43 PM

I think I'm going to go, what slots are open?

broda805 03-21-2011 11:46 PM

9:30, 10:30, and 3-5 still open

SeeingRedat9 03-21-2011 11:48 PM

I'd be down to go. I dont know how exciting it is to see a bone stock Rx8 dyno though.

gregs 03-21-2011 11:56 PM

guys you should come through..stock or not..the price is great..(tilt you can take my spot i have a reserved since your coming from another area...ill be there most of the day so i dont mind waiting around)

gregs 03-22-2011 12:00 AM


Originally Posted by ZOOM-I-DO (Post 3918044)
You going to Dyno Greg?

It would be interesting to see the diff between SR MotorCars Dyno and this one?

What say you?

Doug

Doug I'm looking foward to the dyno to see the difference if i get the chance..if not sunday i will def. go out another day since it's in th neighborhood.:yesnod:

broda805 03-26-2011 05:14 PM

open today most of the day till 5 same rate 25$, tomorrow is pretty booked please call to confirm Tel 951-897-0678 Tom - owner

SiLVeRE8 03-27-2011 06:26 AM

OMG I wish I live in socal!!

superhypered 03-27-2011 09:42 AM

+1 :(

USMC_Skip 03-28-2011 09:37 PM

Results??


All times are GMT -5. The time now is 04:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands