The only negative thing I've heard about the California water blade is that you could scratch your car if you are not careful. Apparently this has happened to several people who were not meticulous enough when washing their car and then used the CWB.

What has happened to some is that some of the tiny specs of dirt that were not totally removed from the car got trapped by the edge of the CWB causing fait long scratches.

You must be extra careful when washing your car if you plan to use the CWB. Everything else about the product is apparently excellent.

 

I am not disagreeing with you on that point, but there is a higher possibility of it happening with the CWB. Cotton towels and micro fiber towels allow for the possibility of the dirt escaping and not scratching your paint; which is why most professional detailers prefer to use cotton and MF towels.

Like I said previously, I like the CWB but I personally do not want to take the risk on my car when other safer proven alternatives are available to me.

 

I love that thing... gorgeous results every time and then you buff it down with a chamois

 

Herc... If you like the CWB check out either the "Water Bandit" (first choice) or "The Absorber" (second choice). The boys on the Autopia forum love it, at least the ones that are not afraid of scratches.

Those guys are **** regarding clean cars - the best detailing site on the Internet by far. Check out the Autopia Forum if you haven't alread done so - a great bunch of guys!!!

 

I've already got a great synthetic chamois

It picks up a LOT of water, but I'll use CWB first just to get the bulk of the water off the car. Then I use one chamois to pick up the bulk of the water, then one more for detailing and final drying.

 

Yeah the CWB is awesome!!! :D

Just becareful on usage.

 

I've used the CWB for over a year and have no scratches to show for it. I use a chamois to touch up the hard-to-get spots.

At work we have these huge white towels (terry cloth??) that soak up megaboatloads of water and dry the car in a hurry. I want some of those now.

 

A few people with the S2k use a leaf blower. I gotta try that one day.

 

blahahhahahahaha im WAY to stupid to try detailing MY OWN car, blahahahahahahah, itd be DESTROYED lol

need to wash someone elses a buncha times first, just dont wanna take a chance
________
VAPIR NO2 REVIEW

 

a leaf blower works like a champ.

 

Just hope you don't suck up some dirt and dand blast your car. I was using one to clear my sidewalk and sucked a couple coins out of my loose pockets. Shot them babies like bullets.

As for the CWB I always worried about it being too soft and could get dirt embedded in the blade. Not sure I would trust it on a black car.

 

I used a wet dry vac before. It was fun I didn't use a towel at all to dry my car. I could tell people driving by were baffled. Cuz they were driving slowly.:D

 

Boyz, I know several friend who worked in AutoShops, BodyShops and DealerShops. All of them (at different occussions) suggested that the best for the car finish is still the good old Wash Mitt. That thing really traps in the dirt and won't them scratch your paint.

Actually, you can tell because after you've use it and try to clean up the Wash Mitt, it takes quite a bit of effort to get the dirt back out from it.

Give it a try.

 

I Second the quality lambs wool wash mitt. My friends at the local car wash use them on thier special customer cars. Like the guy that owns a Lambo , AMG55, 360 Modena, Lexus SUV etc etc (no lie). They soon will be using it on a customer's RX8 :-)

 

blaHahahahahahAhahahAHaHAHahaHAHahahAHa itll be the hottest ride there!
________
COACH HANDBAGS

 

:D

 

I have one of those CWB's and I love it. I agree that if you do not HAND WASH the car and make sure you get every little nook and cranny that can hold a pebble of sand.....rinsing very thoroughly afterward, then you are going to have scratches.

I have been using my blade for about a year now and have no scratches in either of my BLACK cars. I think they're fine to use as long as you're meticulous about the wash job.

Seems less likely to me that you would get a scratch from the blade as opposed to dragging a cotton towel or chamois across your paint that could have dirt trapped in it. The CWB sort of "rinses" itself as you use it anyway. Since it is always "pushing" water, it seems like any dirt particles would likely remain suspended in the water and be "whisked" off of the car.

 

Grasshopper, the best way to get water off of your car..... is to use.... WATER!!! Learn to understand the Zen of the water hose and use the nature of water instead of working against it.

When you're done rinsing the soap and dirt off your car you're ready to take the next step and rinse off the *water*. To do this, use *more water*.

Remove the nozzle from your hose. Turn on the water so a moderate amount flows. You must strive to eliminate turbulence! If the flow is worried you must reduce the flow until it is calm. Now calm your thoughts.

bring the open hose to the car, as close as you can without touching. Begin at the roof and work down. Let the smooth water flow from the open hose across the surface in gentle waves. You'll learn how to "sweep" the water beads away. Your movements must be patient and knowing. Your eyes will tell you if you're succeeding. Your heart will tell you how.

When you have mastered this technique you will be able to finish drying your car with nothing more than a hand towel. When you have reached the 7th level a hankie will do. Upon reaching the 12th level you will no longer desire material objects. You can leave your keys with me

 

Or if you are lazy, get the new Mr Clean nozzle/filter. Ignore the shampoo. The filter works awesome :D Just leave the water on the car, go for a 5 minute drive to dry it quicker if ya want and marvel at spotless drying :D

 

I've used a CWB for years now, both on a black finish and the RX8. Never had any problems with scratches. Only dry the car when it's actually clean, and check the blade for crud before use.

The easiest way to dry the car is to simply drive it. Fast.

 

This is one of the funniest messages I've seen in a long time. Bravo Nubo!

 

Forget the CWB and use a TORO. Leaf Blower that is!. I have found it to be VERY quick (of course, use a cotton towel to get the excess). It does an especially good job on the tires/rims. Now the WET TIRE stuff can be applied immediately after a wash!

HINT: Use the blower to remove 90% of the water. Otherwise hard water will dry to quickly (at least in Arizona) and leave spots.