KYRX8

20x8.5 in the front with a 42mm offset and 20x10 in the rear with a 45 mm offset?

they should fit, right, i know it will be tight, but its the first set of these coming to the country, so i ordered them.

Please, i dont need to hear about 20s or anything like that, i know what they do to performance, just need to make sure they will fit.

jenkins-crew

The back will be real tight! I have 20 x 8.5 all the way around and I rub in the back sometimes.

KYRX8

what offset does yours have in the rear

jenkins-crew

40

KYRX8

what size tire are you running?
i found a guy on cardomain running 20x10s in the rear with 285/30s and claims to not have problems, but it doesnt say what offset it is

EZZY

would be a good idea to roll the guards

jenkins-crew

I rolled mine.

KYRX8

Do you meant the lip inside the fender, or is there something else needs to be rolled or trimmed?

jenkins-crew

yep!

KYRX8

thanks for all the help man.

Kel Rx8

just cut them about a 1/4 inch before the tack weld spots.
look under the rear wheel wells, U will see little dimple's,dents thats where u should trim till
nothing past that for obvious reasons.

KYRX8

Thanks man, i put it on the rack last night and did some measuring and i think they will be tight, but they will fit. Some trimming may be needed though