I searched but noticed most of the cars on S techs didnt have the app. package. Those of you with both, how bad is the scraping? Stock wheels would also be a plus as thats what I have. Also, I'm planning on getting 245/40/18's on the stockers, rubbing wont be a problem will it?
-Matt

 

When I had the stockers with the Stechs, scraping was not that bad of a problem. You will have to go over most bumps/inclines at an angle though. I don't know what would happen with the new tires though, sorry.

Buy the S techs, you wont be sorry.


Here are some pics

First 3 pics are before the car was completely settled. In the last two pics the car is pretty much settled. The front ends up sitting a tad bit lower than the rear I'd say.

 

If your looking for a different type of picture/angle, just ask.

 

the last two pics with the teins settled look very nice, well done.

 

looking good konig

 

did you cut the rubber? cause my mechanic did not AND Inoticed that the car was not dropped almost at all.
did you cut rubber? did you put a load?

 

Your supposed to preload it before you tighten everything up.

 

I have/had the setup you're requesting...

You won't have to worry about rubbing. The 245-40/18 actually looks like it belongs on the stockers...i'll see if i can dredge up some old pics that i had with incline angles so others needing this info could judge...i'll post them tonight if i can find them...go ahead though with the S-Techs...you won't be sorry...although...HopUpRacing has a damn good deal on the D2 coilovers...if they're in your price range...and if you plan to track your car...