only lower the front of the car
2 Attachment(s)
i saw pics of lowered rx8s and i dont like how the back drops...it looks lower than the front. is there anyone out there that only lowered the front of the car? or are there nice springs out there that doesnt drop the back as much as the front if so...how does it ride? look? setup?
my first car was an rsx and i had a good setup where the front is lower and like the look just wondering how it will look on an 8 |
4 Attachment(s)
more pics
|
IIRC most drops DO drop the from more than the rear, or at the very least drop the front more...
Also, I think the front already sits a bit lower than the rear from the factory... I would not recomend only modifying the front, I think it would screw up the ride and handling qualities, and look pretty goofy... Get some adjustable coilovers and you can set the stance exactly how you want it. |
why dont you start showing rx8 photos frist not rsx
|
Originally Posted by ferg
(Post 3232896)
why dont you start showing rx8 photos frist not rsx
|
Originally Posted by Hoss
(Post 3232893)
IIRC most drops DO drop the from more than the rear, or at the very least drop the front more...
Also, I think the front already sits a bit lower than the rear from the factory... I would not recomend only modifying the front, I think it would screw up the ride and handling qualities, and look pretty goofy... Get some adjustable coilovers and you can set the stance exactly how you want it. |
get tein s-techs
|
Originally Posted by li2eggie
(Post 3232904)
i didnt want to go coilovers but i guess i might have to... any suggestions
Why the aversion to coilovers? You could go with a spring/strut combo, but you wont get the height adjustment you are after and you will get much less consistent results as far as performance. |
i wouldn't just lower the front. it will offset handling of the car.
|
lift it, 4x4
|
Get the Tein H-Techs, not S-Techs. IIRC, the H-Techs will lower 1.2" in the front and only 0.8" in the rear. The rear will drop so little that it looks almost like stock height. But then, that's exactly what will give it a forward-rake look, which you (and I) prefer.
(Just ignore the rusty rotors...hahah) https://farm4.static.flickr.com/3433...aed941fa_b.jpg |
H-techs are not .8" in the rear. They are like .8 front and .3 rear. The s-techs are 1.4 front .7 rear.
|
Originally Posted by j8635621
(Post 3233284)
H-techs are not .8" in the rear. They are like .8 front and .3 rear. The s-techs are 1.4 front .7 rear.
I just checked Tein's website. You got the S-Tech specs correct. However, the H-Tech specs are -1.0" (-26mm) front and -0.3" (-8mm) rear. http://www.tein.com/price/mazda.html |
Just saying that you gave the specs of S-techs when you say h-techs. I got mazdaspeed springs (.8" all around) and my rears sit almost right, but the front is about 2 finger widths too tall. I'd say the s-techs would be pretty close to perfect.
|
most springs are lower in the front. my H&R sports lowered the front A LOT more than the rear
|
Originally Posted by ferg
(Post 3232896)
why dont you start showing rx8 photos frist not rsx
|
Originally Posted by li2eggie
(Post 3232884)
i saw pics of lowered rx8s and i dont like how the back drops...it looks lower than the front. is there anyone out there that only lowered the front of the car? or are there nice springs out there that doesnt drop the back as much as the front if so...how does it ride? look? setup?
my first car was an rsx and i had a good setup where the front is lower and like the look just wondering how it will look on an 8 This thread is useless and stupid :yesnod:!! Theres a thing called the search button on this forum lol. There are many threads on this forum that people have posted about lowering spring and coilovers. Yes there are rx8' springs such as the tanabe gf210 and the tanabe nf210 that make the back look lower than the front. The tein s-tech give the car a nice even drop or fuck it just buy coilovers so you can have more adjustability in height and dampening and rebound. |
1 Attachment(s)
My front lowered much more than the rear (in my opinion). Megan Racing springs on OEM shocks:
Attachment 273347 |
Holy hell. Are you sure you didn't do something wrong? So those are 1.75" drop in front and 1.5" drop in rear? That is far less than 1.5" in the back. Did you put your rear sway bar on wrong, causing it to catch on something? I know that happened to me and it bent an endlink.
|
1 Attachment(s)
i just went with coilovers i didnt like the stance of the s techs and now my car sits like this
Attachment 273343 |
2 Attachment(s)
yeah i have s techs and i wanted it a little lower but for a daily car its perfect
Attachment 273341 Attachment 273342 |
S. Techs are the way to go if you don't want to buy coilovers IMO.
If you preload correctly, then it will sit nice. My cars stance is very close to thejew89's. |
Originally Posted by Ross_Dawg
(Post 3232908)
get tein s-techs
|
Originally Posted by @!!narotordo
(Post 3233735)
More like Tein basic coilovers!
|
Originally Posted by j8635621
(Post 3233585)
Holy hell. Are you sure you didn't do something wrong? So those are 1.75" drop in front and 1.5" drop in rear? That is far less than 1.5" in the back. Did you put your rear sway bar on wrong, causing it to catch on something? I know that happened to me and it bent an endlink.
When you bent an endlink did you notice your rear not sitting properly? Michael |
All times are GMT -5. The time now is 01:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands