RX8Club.com
Page 1 of 3
1
2
3
Show 50 post(s) from this thread on one page

RX8Club.com (https://www.rx8club.com/)
-   Series I Wheels, Tires, Brakes & Suspension (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/)
-   -   New wheels: TSW Volcano ! (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/new-wheels-tsw-volcano-53183/)

Omicron 02-19-2005 04:01 PM
New wheels: TSW Volcano !
 
5 Attachment(s)
Had to do something while the site was in turmoil... so I went wheel shopping! :D

After much research (Price vs looks vs weight vs construction) the wheels I chose are TSW Volcano, 18x8, 5x114.3, 40mm offset, and weigh about 20 Lbs each according to my scale. In Hyper-black (which is almost a perfect match for the titanium gray of my car, BTW) they cost $195 each at Streetdreams.org and come with free shipping and a complete set of lug nuts and valve stems. I didn't use the valve stems though, as they're also TPMS compatible. :D These wheels are low-pressure cast and rated at 1800 Lbs load rating each.

One note: They's listed as 18x7.5" but in reality are 8" wide according to my measuring tape.

I LOVE 'em! What do you all think? :D

Omicron 02-19-2005 04:03 PM
2 Attachment(s)
2 more:

Ajax 02-19-2005 04:24 PM
wow. I like those wheels a lot.
Nm. i cant read.

rotarenvy 02-19-2005 04:46 PM
nice wheels!
did you measure from the outside edge or the rim bead where the tyre sits?

Omicron 02-19-2005 05:17 PM
Originally Posted by rotarenvy
nice wheels!
did you measure from the outside edge or the rim bead where the tyre sits?
Bead channel to bead channel.

rodmeister 02-19-2005 05:39 PM
Nice looking wheels. They look like they belong on the car, rather than an add-on like some other wheels.

Omicron 02-19-2005 06:05 PM
Originally Posted by rodmeister
Nice looking wheels. They look like they belong on the car, rather than an add-on like some other wheels.
Thanks, my thoughts exactly. I almost bought the SSR Competitions, but couldn't bring myself to like the 6 spoke design or abide by the almost $500 each price just on principle. Yes they're about 3 Lbs lighter each, but that's not enough to justify the more than double price and less attractive (IMHO!) design.

I also really like the Axis Hiros, but they cost more and (again in my opinion) don't look quite as good.

xdrian 02-19-2005 07:13 PM
lookin good, i wish iu had extra money to buy my dream wheels..... sigh :(

HardHitter 02-19-2005 08:02 PM
Nice wheels but if you don't mind me asking, do you know the % tint you got on your windows? I'm looking to tint them. Thanks!

rudy8 02-19-2005 08:41 PM
Great!
 
hey omi!
nice wheels...one of the best that ive seen on a titanium without looking overdone. arent the stock wheels about 25 lbs?
and does this offset make them come out a little farther?

on a sidenote, are you happy with your tein h setup? just got my ms shocks and springs and think it looks too low... makes the car look "too long for the height", it seems so far.

rudy!
Originally Posted by Omicron
Had to do something while the site was in turmoil... so I went wheel shopping! :D

After much research (Price vs looks vs weight vs construction) the wheels I chose are TSW Volcano, 18x8, 5x114.3, 40mm offset, and weigh about 20 Lbs each according to my scale. In Hyper-black (which is almost a perfect match for the titanium gray of my car, BTW) they cost $195 each at Streetdreams.org and come with free shipping and a complete set of lug nuts and valve stems. I didn't use the valve stems though, as they're also TPMS compatible. :D These wheels are low-pressure cast and rated at 1800 Lbs load rating each.

One note: They's listed as 18x7.5" but in reality are 8" wide according to my measuring tape.

I LOVE 'em! What do you all think? :D

rx8wannahave 02-19-2005 08:48 PM
Nice! Congrats...

I'm still looking for 17 pound rims (that looks nice)that go for about that price you listed....

grapes 02-19-2005 09:14 PM
Omnicron-looks great -are those Pirelli Pzero Nero Ms- if so how are they in the snow.

khtm 02-19-2005 09:18 PM
your car looks TIIIIIIIIIIIIIIIIIGHT!

rx8pilot 02-19-2005 09:26 PM
did you check to see if the mazda emblem cap in the center of the stock wheels would fit on them? just wondering because i really like those..except for the tsw logo in the center...good buy and you freed up some horsepower!

Omicron 02-19-2005 10:15 PM
Originally Posted by HardHitter
Nice wheels but if you don't mind me asking, do you know the % tint you got on your windows? I'm looking to tint them. Thanks!
Thanks! :D And my tint is 3M brand 30%.

Omicron 02-19-2005 10:19 PM
Originally Posted by rudy8
hey omi!
nice wheels...one of the best that ive seen on a titanium without looking overdone. arent the stock wheels about 25 lbs?
22.5 Lbs according to my scale, and I just weighed them tonight. :D
Originally Posted by rudy8
and does this offset make them come out a little farther?
Not that I can detect - they look to fit the same or better than the stock wheels.

Originally Posted by rudy8
on a sidenote, are you happy with your tein h setup? just got my ms shocks and springs and think it looks too low... makes the car look "too long for the height", it seems so far. rudy!
Yeah, the MS stuff looked too low to me in the rear but not enough in the front, which is why I went Tein H-Tech. And I love 'em! Check out this thread where I wrote all about them. :)

brothervoodoo 02-19-2005 10:38 PM
Late to this thread, wheels look good Omi... :)

rx8pilot 02-19-2005 10:39 PM
wow..i feel invisible..*checks*

so..........i guess they didn't fit??

Air Force RX8 02-19-2005 10:50 PM
Originally Posted by rx8pilot
wow..i feel invisible..*checks*

so..........i guess they didn't fit??
I had the same question, but you beat me to it...maybe he will notice soon...

flip 02-19-2005 10:50 PM
Nice wheels (H)Omi! :) Another satisfied TSW client! Woo Hoo! Your car looks great!

.. rx8pilot, the oem center caps are too small for the TSW's :( i tried it on mine.. but, oh well... THE WHEELS LOOK GREAT! :cool:

Lock & Load 02-19-2005 10:55 PM
Looks :cool: change the center caps from TSW to OMI :cool: :D ,


Cheers
michael

rx8pilot 02-19-2005 11:19 PM
Originally Posted by flipstream
Nice wheels (H)Omi! :) Another satisfied TSW client! Woo Hoo! Your car looks great!

.. rx8pilot, the oem center caps are too small for the TSW's :( i tried it on mine.. but, oh well... THE WHEELS LOOK GREAT! :cool:

crrrraap... thanks omicron...uh..i mean flipstream. :rolleyes:

maybe we could just paint the emblem on it..lol

flip 02-19-2005 11:21 PM
maybe you can glue the mazda caps onto it.. :p Ghetto style! LOL

XDEEDUBBX 02-19-2005 11:31 PM
looks clean omicron..now i need some rims

rx8pilot 02-19-2005 11:36 PM
Originally Posted by flipstream
maybe you can glue the mazda caps onto it.. :p Ghetto style! LOL
lol.. u know what would be pimp..if the mazda emblem in the center stayed in place while the wheel turns around it....."floating" :) i think rolls royce does this..not sure.. that would be pimp..


All times are GMT -5. The time now is 08:10 AM.
Page 1 of 3
1
2
3
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands