Notices
Series I Wheels, Tires, Brakes & Suspension

Installed Axis Hiro RIMS on my RX8...

Thread Tools
 
Rate Thread
 
Old May 4, 2004 | 11:03 PM
  #1  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Cool Installed Axis Hiro RIMS on my RX8...

Well confirmed today the TPMS fits the hiro perfectly... Also confirmed that the best staggered sizes, offsets and tires for the RX8 are...

19x8.5 Offset 45mm (Front) 235/35-19 Tires (32psi)
19x9.5 Offset 55mm (Rear) 265/30-19 Tires (36psi)

I know they fit because after much research that included fitting them (gunmetal/amph hiros) on my car; they work, fit and look awesome...

The car handles very well with them, turn in is now the best I have ever experienced and I have driven just about everything out there including 360 modenas... The tire pressures are set up to neutralize the affect of under-steer due to staggering… I have to say the handling is still nice and neutral... The rolling dia of this setup is almost identical to stock; just a little smaller and according to my hand held GPS is now correct; 65mph is now 65mph...

Will post pics tomorrow...

Last edited by cortc; May 4, 2004 at 11:35 PM.
Reply
Old May 5, 2004 | 12:17 AM
  #2  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Some pictures...

Picture 1:
Reply
Old May 5, 2004 | 12:18 AM
  #3  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Picture 2:
Reply
Old May 5, 2004 | 12:18 AM
  #4  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Picture 3:
Reply
Old May 5, 2004 | 12:19 AM
  #5  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Later some pictures of tires and then everything installed on the car...
Reply
Old May 5, 2004 | 12:28 AM
  #6  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Hankook Ventus K104...

Picture of tire...
Reply
Old May 5, 2004 | 12:32 AM
  #7  
mikeb's Avatar
100% Italian
 
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
what happened to the HRE
Reply
Old May 5, 2004 | 01:15 AM
  #8  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
mikeb: HREs are on order and taking way to long... I bought these at a really good price (the tires were just 596), and they are great; will take pictures in the morning and post... Was going to sell them later but like them so much I may just keep them, HREs might just be history...
Reply
Old May 5, 2004 | 11:33 AM
  #9  
Kel Rx8's Avatar
if your not 1st your last
 
Joined: Jan 2004
Posts: 4,889
Likes: 1
From: Jersey & Peru
very nice
marcos acosta has those on his 3 rotor powered rx8
Reply
Old May 5, 2004 | 06:18 PM
  #10  
RolenImportsRX8's Avatar
Registered User
 
Joined: Feb 2004
Posts: 183
Likes: 0
From: Ohio
can't wait. where did you buy them from? Does a 275 still fit on the rear?
Reply
Old May 5, 2004 | 10:27 PM
  #11  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Smile Ok, here we go... (Rear)

Sorry, the car is a little dirty...

What do you guys and gals think?

RolenImports: Yes, you could fit a 275... That just would be to wide (There is such a thing as to much of a good thing)...

Last edited by cortc; May 6, 2004 at 06:05 PM.
Reply
Old May 5, 2004 | 10:35 PM
  #12  
RXhusker's Avatar
Int-X 293WHP 242TQ :)
 
Joined: Oct 2002
Posts: 1,022
Likes: 0
From: Omaha, NE
Looks very nice -- and probably way less than half the cost of the HRE's :D
Reply
Old May 5, 2004 | 10:35 PM
  #13  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Front...

Here is a shot of the front, notice the difference in the spoke angle and the width of the lip...
Reply
Old May 5, 2004 | 10:41 PM
  #14  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Complete view...

Here is the whole car...
Reply
Old May 5, 2004 | 10:48 PM
  #15  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Side shot...

One from the side...

Notice how the wheels sit very nice in the wheel well, (looks stock and fits perfectly, lots of research and time went into selecting this combination of wheel/tire sizes and offsets...) you will see this in some of the other shots better...
Reply
Old May 5, 2004 | 10:57 PM
  #16  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Front & rear from angle...

Here you can see better the great clearence... There is room everywhere, and the space from the inside upper edge of the rimto the springs front and rear is over an inch...
Reply
Old May 5, 2004 | 11:01 PM
  #17  
Psychofox's Avatar
我愛台妹,台妹愛我
 
Joined: Mar 2003
Posts: 377
Likes: 1
From: CA
very nice!! now its time for you to get some big brake kit
Reply
Old May 5, 2004 | 11:03 PM
  #18  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Another angle...

Here is another angle shot...
Reply
Old May 5, 2004 | 11:15 PM
  #19  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Rear side closeup...

Here is a side closeup...

Yes I will be getting a brembo brake kit front and rear 4/6 piston front 4 piston rear with drilled rotors 14" front 13" rear...
Reply
Old May 5, 2004 | 11:20 PM
  #20  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Front angle...

These wheels will clear any brakes you can throw at them...
Reply
Old May 5, 2004 | 11:30 PM
  #21  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Rear shot...

Double image...
Reply
Old May 5, 2004 | 11:36 PM
  #22  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Front closeup...

With wheels turned at lock there is good clearence...
Reply
Old May 5, 2004 | 11:42 PM
  #23  
cortc's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 1,401
Likes: 0
Post Last pic...

TPMS...
Reply
Old May 6, 2004 | 12:14 AM
  #24  
Ned M's Avatar
Registered User
iTrader: (2)
 
Joined: Sep 2003
Posts: 239
Likes: 0
From: Cincinnati
Those look great, Cortc. Right up there with the guy with the Volk SF Challenges w/black spokes. Nice pictures, too.
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:31 PM.