iforged classic rims question
#1
Registered User
Thread Starter
iTrader: (-1)
Join Date: Oct 2004
Location: san diego
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
iforged classic rims question
hi guys i am getting iforged classic 19x8.5 front and 19x10 for the rear. i was wondering can i get the rear any wider or 10 is already pushing it? also what kind of the tire or size of the tire should i get? and i got the rims for 2800 dollars so i don't know if it's good deal or not. replys are aprreciated.
btw anyone know how long will take iforged to make the rims?
Thank you! below is current picture of my car.
btw anyone know how long will take iforged to make the rims?
Thank you! below is current picture of my car.
#2
Scuderia
iTrader: (6)
Join Date: Jan 2005
Location: Buckeye Country
Posts: 1,955
Likes: 0
Received 0 Likes
on
0 Posts
First off, lovin' your current Enkei Phalenx(?).
A few members have been able to fit 10" wide rears, but I believe they have modified their fenders by either shaving or rolling them. I have 19x9.5, a 37+ offset, 275/30 tires, Tein S-Tech. Rubbed until I got my fenders rolled. I'd go with 275/30 tires or shorter sidewalls. 275/30 should be good up to 11" width, I believe.
Where are you getting your iForged? If you're getting a special color, I'd expect a longer wait.
A few members have been able to fit 10" wide rears, but I believe they have modified their fenders by either shaving or rolling them. I have 19x9.5, a 37+ offset, 275/30 tires, Tein S-Tech. Rubbed until I got my fenders rolled. I'd go with 275/30 tires or shorter sidewalls. 275/30 should be good up to 11" width, I believe.
Where are you getting your iForged? If you're getting a special color, I'd expect a longer wait.
#3
I am a meat popcicle
I have 18x10 +50 and have no modifications running 275s in the rear. I'd think that if you weren't too aggressive on the offsets, you could have 19x10's without rolling... But, since I have 18's I could be wrong.
Thread
Thread Starter
Forum
Replies
Last Post
yankeepicker
Series I Trouble Shooting
3
09-11-2015 05:42 PM