Espelir Install Question
#1
RX-8 Pilot
Thread Starter
Join Date: Oct 2003
Location: the OC is where i reside
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Espelir Install Question
i finished installing the rear springs on my 8 with the help of the DIY forum. it turned dark and i didnt have any proper lighting so the fronts are waiting till tuesday. i know when you do the fronts, you have to get everything set and down on the ground before you tighten the upper control arm bolts or else the spring will not be preloaded and the ride height will appear higher than stock. is there anything like this for the rear springs? like......is everything supposed to be down on the ground before i retorque the lower control arm? it seems like the rear has dropped slightly, but not as much as i was expecting. does anyone else have pics of espelir springs installed? or maybe the rear will drop more when the front springs are installed. i believe the springs are already settled because i bought them used.
Thread
Thread Starter
Forum
Replies
Last Post
Pelleilee
New Member Forum
6
09-29-2019 10:07 AM
MolecularConcept
New Member Forum
15
08-05-2015 04:43 PM