Calling all RAYS wheel owners
It's not the same car, but the wheels look similar to your old VOLKs: 8 maniac's RX-8
It's not the same car, but the wheels look similar to your old VOLKs: 8 maniac's RX-8
Those are mine, I bought them from 8 maniac when he sold his 8 and bought a Monster Audi S4. SARX FTW.
^In the Calling all Sunlingt Silver thread, someone is asking about your specs on the VOLKs. I mentioned that it could possibly 18x9.5 and 10.5 +15 all around as your previous wheels.
It's not the same car, but the wheels look similar to your old VOLKs: 8 maniac's RX-8
I already have a plan for my next set... I just need money! Unfortunately, I probably wont be getting Volks next.
T-29 years and counting
iTrader: (3)
Joined: Apr 2005
Posts: 3,062
Likes: 0
From: North Fontana, CA.
I may behind my times but i just noticed that there are about 4-6 new model wheels out there! All pretty good looking by Rays, but mostly one piece.
http://www.rays-msc.com/wheels/index.cgi?b=1
Here are some pictures I took at a local Nissan dealership.
http://www.rays-msc.com/wheels/index.cgi?b=1
Here are some pictures I took at a local Nissan dealership.
Last edited by lesper4; Sep 7, 2011 at 10:55 AM.







I have the same size and width on all four of them with +38 offset. +38/40 in front is a perfect fit if you lower the car with just drop springs, the rears will be tucked. Had two adults sit in the back, the wheels cleared and didn't rub the rear fenders. It may still clear without rolling the rear fenders even if the offset is 5 or 10 mm less.
I miss those so much lol. I'm glad that they at least got use with a couple of good RX-8 owners. If it wasn't for the different bolt pattern, I would have tried to keep those volks... So much nicer than these:

I already have a plan for my next set... I just need money! Unfortunately, I probably wont be getting Volks next.
I already have a plan for my next set... I just need money! Unfortunately, I probably wont be getting Volks next.
Last edited by Grace_Excel; Sep 8, 2011 at 03:35 PM.
9.5 +33 doesn't need a fender roll with 245/40 but will rub through some plastic pretty quick. +28 needed a roll and some of the bumper tab removed.
+38 for stockish height
+33 for about an inch lower (springs)
+28 for about 1.8-2" lower
+23 for slammed
If you get a pull you can go more aggressive
+38 for stockish height
+33 for about an inch lower (springs)
+28 for about 1.8-2" lower
+23 for slammed
If you get a pull you can go more aggressive
And yes I love giving my opinion. Don't get your panties in a twist fruity, I was just telling you about your sig, seems pointless to have a sig advertising something that is over but rock it if you like.
Last edited by 9krpmrx8; Dec 2, 2011 at 05:44 PM.










