hmm... so are you running a +36 rear offset? rubbing at stock height or no?

all the sizes should be on the inner portion of the wheels...unless the stickers were removed. there is no way you can run a 10.5 +36 offset. you have 9.5 in the back

I was told it was a +51 offset. the rear stickers are gone. and oh yes they rub. but I rolled the fenders and they only rub when I turn into my driveway a little too fast

I'll find the truth somehow.

umm... go measure the size of the lip. if you are sure its a 10.5 then find out the size of the dish and we can see what offset it is. there is no such thing as +51 offset for sf-challenges.

I didnt see a +51 either. I emailed the previous owner for some info. Its driving me crazy.

tell me the sizes of your tires...that'll help out

275/30/19.

same as me...

you might be running +34 cause i got ce28s with 9.5 rear and +34... mine rubs as well

i doubt thats a 10.5 cause you would need to run some really negative camber to fit it. Only one other guy on the forum ran 10.5's but his camber setup was crazy..

275 tires on a 10.5 would look seriously stretched. i'm pretty sure you're running the same setup as ngo and i

Just got these installed.

Rays G-Games 77F
18" X 8.0" 42 offset
Silver

I'll get a pic perpendicular to the car today a bit tough taking them in the garage with my wife's Grand Prix GXP next to it :D:

looking good ^^^

Since none of you bastards (;)) with the TE37 or LE37 will post your sizes & offsets, can some one at least tell me if 19x8.5 +22 will fit front and back with a fender roll or cut?

I already have the wheels, so your answer will help me decide between buying an RX-8 or an Acura TL as my new daily :naughty:

this is your first post. if you weren't being an ass and asked nicely someone might help you.

1 - You can easily find our Stock Rim Size and offset on the board. That should let you know if those rims will fit or not.
2 - Do you even know the stock rim/offset size of the TL?
3 - go buy the TL

here is my new and old.
 

Here is my TE-37 With ings offset. 19*8.5 +22 and 19*9.5+34

and my old Gramlights 57pro

Now you get what you want to know, so please be nice from now on.

who would base a car purchase off of the wheels they bought??? it should be the other way around.

btw...car is HOT Elite...yummy!

Sorry, sarcasm doesn't carry over very well on forums! I went back and added a smiley just for you :grouphug:

The stock rim size/offset on the RX-8 is 18x8 +50, the stock rim size on the TL is 17x8 +45. Both have the 5x114.3 bolt pattern. You mean I'm the first guy to ask if a particular rim would fit? Why are the majority of the people in this thread posting their wheel specs along with the pictures then??? :rolleyes:

Thank you kind sir for the assistance!! Nice looking 8 you have there! Did you have to roll the front or rear fenders?

Thanks! :kiss:

:D:

The criminally insane :greenchai

It's only a partial factor, i'd prefer not to sell them if possible but if I found something that I just had to have as my daily driver then they would be gone.

All I know is alot of people have picked a car to buy based on much worse.

Elite is having rubbing issues with the front 19x8.5 +22. if you look at the pictures, the front wheels stick out past the fender. so with the TL, it'll be even worse.

At least I can see what 8.5 +22 looks like on the RX-8 so I know what I'd be up against. I already know i'd have to roll the fenders on the TL. These are 19x8 +30, so i'd need an extra 14mm or about a 1/2 inch more. Those are 245/35 tires though so the stretched 235's on the 8.5's would help some.

http://revolutionsignworks.com/misc/tlrims01.jpg
http://revolutionsignworks.com/misc/tlrims02.jpg

/offtopic Sorry :(

very off topic...you're ruining my RAYS wheels post!!!! ARGH :D:

:crying: And you're even a fellow Marylander :(

To get things half way back on topic these are my wheels :icon_tup:

http://www.bimonscificon.org/images/evo/evo2.jpg