Notices
Series I Wheels, Tires, Brakes & Suspension

alingnment question

Thread Tools
 
Rate Thread
 
Old Sep 7, 2007 | 06:03 PM
  #1  
kpex76's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 34
Likes: 0
From: IL
alingnment question

what is the maximum camber front and rear the rx8 can give on a stock set-up?

I drive fairly aggressive and I would like a bit more turn in.

What are some of the alignment specs some of you semi-aggressive drivers use?
Reply
Old Sep 7, 2007 | 06:41 PM
  #2  
costello's Avatar
Registered
 
Joined: Jan 2006
Posts: 172
Likes: 0
From: Orlando, FL
This was my autocross setup. I was able to max out the front at -1.2 degrees. Set the back at -1.1 degrees although I think it'll go to at least -1.4 and maybe even more. I wanted it to rotate better so I used less camber in the back. Toe it out in the front a little (1/32 or 1/16) and zero the toe in the back should also help it turn in better.
Reply
Old Sep 7, 2007 | 06:49 PM
  #3  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
lots of good info here.

https://www.rx8club.com/rx-8-racing-25/alignment-settings-street-track-use-43308/

keep reading the whole thread. have fun..

beers
Reply
Old Sep 8, 2007 | 12:39 AM
  #4  
kpex76's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 34
Likes: 0
From: IL
thanks guys.
excellent reading materials.

Last edited by kpex76; Sep 8, 2007 at 12:45 AM.
Reply
Old Sep 8, 2007 | 12:36 PM
  #5  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,936
Likes: 2,141
it depends on several factors, we've been able to get over 2 deg on RF and a little less on the LF ...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Evan Gray
Series I Trouble Shooting
4
Nov 24, 2015 01:00 AM
nferguson88
RX-8 Parts For Sale/Wanted
1
Oct 6, 2015 12:45 PM
urbanvoodoo
RX-8 Discussion
2
Sep 30, 2015 12:41 AM
pjwermuth
RX-8 Discussion
5
Sep 28, 2015 11:36 PM
kody59
RX-8 Discussion
3
Sep 28, 2015 03:43 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:46 AM.