9.5's in rear (hmm)
Stock is 18" x 8" width with a 50 offset. Check this thread,,,
http://www.1010tires.com/WheelOffsetCalculator.asp
http://www.1010tires.com/WheelOffsetCalculator.asp
You are adding 38mm to the width of the wheel. 4mm on the inside and 34mm on the outside.
It means the inside of the wheel will move inward 4mm and the outside of the wheel will move out 34mm.
This is compared to the stock rim.
So get out the digital caliper or tape measure and measure outside and inside from the rim lip and see if you have clearance.
It means the inside of the wheel will move inward 4mm and the outside of the wheel will move out 34mm.
This is compared to the stock rim.
So get out the digital caliper or tape measure and measure outside and inside from the rim lip and see if you have clearance.
[QUOTE=808RX8YEZIR;2031760]i have 19.5 on the rear with a +35 offset and they fit with no rubbing, but if i lower it im gona have to roll or shave my fenders.[/QUOTE
19.5 damn
photos...
beers
19.5 damn
photos...
beers
i'm currently running on 18"x9.5 offset 43 rear on 265/35/18 Yokohama ADVAN NEOVA AD07 tyres with no problems whatsoever..... oh yeah.... ive got RE-Amemiya Lowered Springs fitted too.......
The first thing is the offset you use as well as the overall rim width. I use 275/30R19 tires in the rear no problems at all no fender rolling no rubbing nada, I have a set of 285/30R19 tires im gonna try as well.. That will be super close to the Strut thing in the rear.. but ima try it..
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
Sep 27, 2015 07:38 PM
drlubell
RX-8's For Sale/Wanted
0
Sep 26, 2015 11:58 PM



