19x10.5" wheel in rear!!!

Mar 13, 2005 | 11:15 AM

success07

Thread Starter

I'm Kind of a Big Deal

Joined: Aug 2003

Posts: 918

Likes: 0

From: Columbus, Ohio

19x10.5" wheel in rear w/ 4" lip!!!

As alot of you may have seen, I just got the 19x8.5" Falken Koblenz in black with a polished lip. If not, you can check them out below. (Inserting plug below) :D

https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/lighting-yellow-w-19x8-5-falken-koblenz-black-w-polished-lip-53976/

The actual point of this thread is figure out the following. As I searched for threads on the widest rear wheels, all I could find was 19x10 but nothing more. The reason I did this is because I just found out that the Falken Koblenz now comes in a 19x10.5" - 114.3 - 30mm w/ a 4" lip!!!!

Is there any chance that this will fit?

If so, I may seek an upgrade or exchange. Thanks in advance for your help.

Last edited by success07; Mar 13, 2005 at 11:22 AM.

Mar 13, 2005 | 11:21 AM

Kel Rx8

if your not 1st your last

Joined: Jan 2004

Posts: 4,889

Likes: 1

From: Jersey & Peru

see if you can call or ask acostamotorsports
there 3 rotor previously ran 19x10.5
but u will have the trim the rear inner fender.

Mar 13, 2005 | 03:10 PM

TR1GGERx1

Guest

Posts: n/a

looks tight

Mar 13, 2005 | 03:29 PM

Napboy

Sho'Nuff

Joined: Jul 2003

Posts: 632

Likes: 1

From: San Diego

check out this guy. he's got 10.5's in the rear.

page 3

Mar 13, 2005 | 05:02 PM

9100RPM

Registered User

Joined: Nov 2004

Posts: 96

Likes: 0

Quote:

Originally Posted by success07

As alot of you may have seen, I just got the 19x8.5" Falken Koblenz in black with a polished lip. If not, you can check them out below. (Inserting plug below) :D

https://www.rx8club.com/showthread.php?t=53976

The actual point of this thread is figure out the following. As I searched for threads on the widest rear wheels, all I could find was 19x10 but nothing more. The reason I did this is because I just found out that the Falken Koblenz now comes in a 19x10.5" - 114.3 - 30mm w/ a 4" lip!!!!

Is there any chance that this will fit?

If so, I may seek an upgrade or exchange. Thanks in advance for your help.

Put those on in OZ and you may as well drive to the copshop and hand over the keys...insane but how great. 9100RPM