rx8 will not tickover
#1
rx8 will not tickover
Changed battery on rx8 yesterday and now it will not idle just dies, revs ok and starts and runs ace, but driving in town today i was sweating , having to use handbrake and gas, any help would be great , or and tried all resets, and rang Mazda and they said it just takes time for computer to recognize again , ive done loads of stop start journeys ,motorway runs since yesterday but just same, thinking about using a tie on fuel pedal lol cheers
Paul
Paul
#2
SARX Legend
iTrader: (46)
Read the thread in my signature and search. It is a common issue and has been discusses a thousand times.
You could also follow the troubleshooting guide in the factory service manual.
M A Z D A
You could also follow the troubleshooting guide in the factory service manual.
M A Z D A
#3
rx8 will not tickover
Changed battery on rx8 yesterday and now it will not idle just dies, revs ok and starts and runs ace, but driving in town today i was sweating , having to use handbrake and gas, any help would be great , or and tried all resets, and rang Mazda and they said it just takes time for computer to recognize again , ive done loads of stop start journeys ,motorway runs since yesterday but just same, thinking about using a tie on fuel pedal lol cheers
Paul
Paul
#5
rx will not idle
Changed battery on rx8 yesterday and now it will not idle just dies, revs ok and starts and runs ace, but driving in town today i was sweating , having to use handbrake and gas, any help would be great , or and tried all resets, and rang Mazda and they said it just takes time for computer to recognize again , ive done loads of stop start journeys ,motorway runs since yesterday but just same, thinking about using a tie on fuel pedal lol cheers
Paul
Paul
#7
Anybody please help
Changed battery on rx8 yesterday and now it will not idle just dies, revs ok and starts and runs ace, but driving in town today i was sweating , having to use handbrake and gas, any help would be great , or and tried all resets, and rang Mazda and they said it just takes time for computer to recognize again , ive done loads of stop start journeys ,motorway runs since yesterday but just same, thinking about using a tie on fuel pedal lol cheers
Paul
Paul
#12
Hi Bud its a maze in Mazda manual, please could you point me to a thread about my problem, all it is its running fine, starting ok , just changed battery and now wont idle just dies, please help, kind regards, Paul ,UK
#14
Rockie Mountain Newbie
I'll give you a hint:
Troubleshooting section
OBD Drive Mode
Then follow the instructions on how to drive your car to reset everything.
Good luck figuring this out.
Once you do, you will be knowledgeable.
BC.
Troubleshooting section
OBD Drive Mode
Then follow the instructions on how to drive your car to reset everything.
Good luck figuring this out.
Once you do, you will be knowledgeable.
BC.
#15
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 240 Likes
on
110 Posts
Post Deleted. Please view RX-8 Club forum user code of conduct: RX8Club.com - FAQ: RX8Club.com Forum Rules
We don't tolerate that type of response, even if you feel justified in using it.
They are ACTUALLY helping, even if you aren't seeing it. You haven't provided much information to go on, so all they can do is point you to the official troubleshooting procedures. The amount of help you will get in life is directly proportional to the amount of effort you put in.
We don't tolerate that type of response, even if you feel justified in using it.
They are ACTUALLY helping, even if you aren't seeing it. You haven't provided much information to go on, so all they can do is point you to the official troubleshooting procedures. The amount of help you will get in life is directly proportional to the amount of effort you put in.
#16
FULLY SEMI AUTOMATIC
iTrader: (9)
nice work pearl. i knew that wasnt going to end well
#18
no agenda
iTrader: (2)
I never thought I would say this but I kind of feel for the OP
That link to the Workshop manual .. or I should say the way the information is served up is *****.
You need to view it in IE7 for the web pages to be served up correctly, or else you get all these extra tabs opening.
I don't know if it's the CSS or what but it's f'n crap trying to navigate thru that manual.
I use IE and hit F12 to get to developer mode and select IE7, that seems to render the manual correctly.
But other than that ... and everyone wonders why there're posts about Forum pleas and 98% ******* threads
Good grief
That link to the Workshop manual .. or I should say the way the information is served up is *****.
You need to view it in IE7 for the web pages to be served up correctly, or else you get all these extra tabs opening.
I don't know if it's the CSS or what but it's f'n crap trying to navigate thru that manual.
I use IE and hit F12 to get to developer mode and select IE7, that seems to render the manual correctly.
But other than that ... and everyone wonders why there're posts about Forum pleas and 98% ******* threads
Good grief
Last edited by wcs; 04-12-2013 at 09:06 AM.
#19
WENTGERMAN
iTrader: (6)
They are ACTUALLY helping, even if you aren't seeing it. You haven't provided much information to go on, so all they can do is point you to the official troubleshooting procedures. The amount of help you will get in life is directly proportional to the amount of effort you put in.
#20
Super Moderator
jackandharvey has been given 7 days in the cooler for bad attitude and language.
Warning to him, anymore and you Will get a permanent ban.
Warning to him, anymore and you Will get a permanent ban.
#21
Registered
iTrader: (4)
RX8Club Rules of Conduct:
If you can't follow these rule, find a home elsewhere.
4. Personal attacks against other forum members will not be tolerated, nor will any type of "trolling" for a fight. This includes political attacks, slurs, or sneering at any viewpoint or political party.
17. Do not start threads or submit posts on religion or politics in the Lounge area or anywhere else. Experience with the forum has proven that political or religious discussions inevitably become flamefests, which are prohibited (see the first rule above). So don't start them.
6. Be respectful. This is harder to define, but will be moderated. An example would be disrespecting RX-8 owners who chose an automatic transmission over a manual, and "sneering" at them or acting like they're idiots for the choice they made. If a moderator believes you are being purposefully disrespectful to a fellow member, you will be notified. Bashing for the sake of bashing will not be tolerated.
Thread
Thread Starter
Forum
Replies
Last Post