Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

My car is shaking and unstable idling when it stop.

Thread Tools
 
Rate Thread
 
Old Feb 8, 2010 | 08:30 AM
  #51  
Shijin-Kun's Avatar
Rotary Power!
iTrader: (1)
 
Joined: Feb 2009
Posts: 709
Likes: 0
From: Houston, TX
Originally Posted by agood
So is this supposed to be the rubber mounts? http://finishlineperformance.com/sto...cat=338&page=1 . these dont seem to be rubber and a little to big.
yup thats it
Reply
Old Feb 9, 2010 | 02:06 PM
  #52  
agood's Avatar
agoodrx8
iTrader: (1)
 
Joined: Jul 2009
Posts: 36
Likes: 0
From: Sacramento
You guys use that site or did you happen to find some cheaper ones?
Reply
Old Feb 9, 2010 | 02:53 PM
  #53  
Shijin-Kun's Avatar
Rotary Power!
iTrader: (1)
 
Joined: Feb 2009
Posts: 709
Likes: 0
From: Houston, TX
i got lucky and found mine on ebay.
Reply
Old Feb 9, 2010 | 07:30 PM
  #54  
agood's Avatar
agoodrx8
iTrader: (1)
 
Joined: Jul 2009
Posts: 36
Likes: 0
From: Sacramento
Dam how much did you end up paying for em? How long did it take you to replace them?
Reply
Old Feb 9, 2010 | 07:43 PM
  #55  
Shijin-Kun's Avatar
Rotary Power!
iTrader: (1)
 
Joined: Feb 2009
Posts: 709
Likes: 0
From: Houston, TX
i want to say about 80 for both, it take around an hour to install
Reply
Old Feb 11, 2010 | 01:05 AM
  #56  
agood's Avatar
agoodrx8
iTrader: (1)
 
Joined: Jul 2009
Posts: 36
Likes: 0
From: Sacramento
Dam you got hella lucky then. You work alone or had some help?
Reply
Old Feb 11, 2010 | 01:57 AM
  #57  
ZumnRx8's Avatar
RX8 & RX7 owner
 
Joined: Mar 2008
Posts: 5,172
Likes: 3
From: So. California
Motor mounts +1
Reply
Old Feb 11, 2010 | 08:36 AM
  #58  
Shijin-Kun's Avatar
Rotary Power!
iTrader: (1)
 
Joined: Feb 2009
Posts: 709
Likes: 0
From: Houston, TX
worked alone, you just have to take both from wheels. Once you look near where the engine is youll know where they are. You cant miss them because they are really right in you face past the wheel well.
Reply
Old Feb 11, 2010 | 07:14 PM
  #59  
agood's Avatar
agoodrx8
iTrader: (1)
 
Joined: Jul 2009
Posts: 36
Likes: 0
From: Sacramento
Ya i tried locating them and i found em looking from the top and you can actually see both of them but ill prob just get a couple people to help me out just for some company lol.
Reply
Old Dec 29, 2014 | 09:15 AM
  #60  
Khaos3d's Avatar
New Member
 
Joined: Aug 2013
Posts: 2
Likes: 0
I have a similar issue on my 06 Rx8. Yet its very peculiar behavior and I hope someone can share some input on this.

I get a jumpy idle from 800 - 1500 up and down in a repeated sequence. but the interesting part is, it happens only and exclusively when my foot is down in the clutch and I input Any gear without releasing the clutch. Once I start moving gets ok, Just happens when Stopped + CLutch down + any Gear.

If I move it stops, if I remove the latched gear, it stops, if I and let it seat idle it stops. Just my feet on the clutch, nothing happens, just the combination is what replicates it.

Regards
Reply
Old Dec 29, 2014 | 02:21 PM
  #61  
GK1707's Avatar
Registered
iTrader: (10)
 
Joined: Jan 2012
Posts: 1,051
Likes: 6
From: Queens, NY
Clutch pedal position sensor. It's under the pedal. Chances are you damaged it if you took out your clutch pedal assembly. I think the new sensor was like $15~ from Atkins rotary.
Reply
Old Dec 29, 2014 | 11:41 PM
  #62  
swoope's Avatar
Zoom-Freakin'-Zoom
iTrader: (5)
 
Joined: Jan 2004
Posts: 14,603
Likes: 36
From: orlando, fl
Originally Posted by Khaos3d
I have a similar issue on my 06 Rx8. Yet its very peculiar behavior and I hope someone can share some input on this.

I get a jumpy idle from 800 - 1500 up and down in a repeated sequence. but the interesting part is, it happens only and exclusively when my foot is down in the clutch and I input Any gear without releasing the clutch. Once I start moving gets ok, Just happens when Stopped + CLutch down + any Gear.

If I move it stops, if I remove the latched gear, it stops, if I and let it seat idle it stops. Just my feet on the clutch, nothing happens, just the combination is what replicates it.

Regards
neutral position switch..

beers
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SUKIEE
New Member Forum
19
Oct 9, 2017 09:41 PM
9krpmrx8
Series I Trouble Shooting
23
Nov 5, 2015 11:45 PM
digitalmonkey79
New Member Forum
5
Jul 29, 2015 12:09 AM
dbarber
Series I Trouble Shooting
14
Jul 25, 2015 01:34 PM
Bamaham
New Member Forum
2
Jul 23, 2015 08:08 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:20 AM.