Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Loose windows...

Old Dec 1, 2008 | 06:17 PM
  #1  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
Loose windows...

Is anyone else here able to basically yank their windows back and forth (with it rolled down half way) as if there was nothing holding them in?

I can do this side-to-side and up-and-down. It will literally move a centimeter in each direction. It's worse than it looks in this picture below. Would I be able to bring this in and get it fixed?

(06 GT, 34k mi)

Reply
Old Dec 1, 2008 | 06:22 PM
  #2  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
here is a better picture... btw it happens on both the driver and passenger side.

Reply
Old Dec 1, 2008 | 07:01 PM
  #3  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
There are two screws that secure the glass (see attached pic)
Remove the inner door garnish and you should see two hole covers for these screws.
With the window raised roughly 1/2" (so you can grab the top of the glass), loosen both screws and ensure the glass is bottomed out (DON'T lift the glass out).
Then tighten the screws.
Attached Thumbnails Loose windows...-door-glass.jpg  
Reply
Old Dec 1, 2008 | 08:35 PM
  #4  
Juice's Avatar
I made some poos
iTrader: (1)
 
Joined: Sep 2005
Posts: 841
Likes: 0
From: Pittsburgh, PA
I have the same problem.

I am going to have to check out what Jon316G posted up about it. I just never had the motivation to remove my door panels after I installed my new speakers.
Reply
Old Dec 1, 2008 | 09:15 PM
  #5  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
Originally Posted by Jon316G
There are two screws that secure the glass (see attached pic)
Remove the inner door garnish and you should see two hole covers for these screws.
With the window raised roughly 1/2" (so you can grab the top of the glass), loosen both screws and ensure the glass is bottomed out (DON'T lift the glass out).
Then tighten the screws.
thank you. looks like mazda has trouble tightening screw...
Reply
Old Dec 1, 2008 | 09:19 PM
  #6  
Razz1's Avatar
Mu ha.. ha...
 
Joined: Aug 2004
Posts: 14,361
Likes: 3
From: Cali
I think you have been driving too fast around left hand corners and loosened them.
Reply
Old Dec 1, 2008 | 09:23 PM
  #7  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by alexisthemovie
thank you. looks like mazda has trouble tightening screw...
Have you had work done to your door from the dealer?
Reply
Old Dec 1, 2008 | 09:31 PM
  #8  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
Originally Posted by Razz1
I think you have been driving too fast around left hand corners and loosened them.
explain the right side then?
Reply
Old Dec 1, 2008 | 09:32 PM
  #9  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
Originally Posted by Jon316G
Have you had work done to your door from the dealer?
i have not
Reply
Old Dec 1, 2008 | 09:33 PM
  #10  
Jon316G's Avatar
Grasshopper
iTrader: (1)
 
Joined: Dec 2006
Posts: 6,779
Likes: 50
From: Streetsboro, OH
Originally Posted by alexisthemovie
i have not
I just think its interesting that you have a loose window AND a loose door handle (that you posted in another thread).
Reply
Old Dec 1, 2008 | 09:41 PM
  #11  
alexisthemovie's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 311
Likes: 0
From: la crescenta, ca
Originally Posted by Jon316G
I just think its interesting that you have a loose window AND a loose door handle (that you posted in another thread).
the driver side door doesn't have the handle problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RevMeHarder
New Member Forum
8
Jun 1, 2026 02:30 PM
XianUnix
Series I Trouble Shooting
6
Sep 29, 2015 03:48 PM
DeltaJ802
RX-8 Discussion
3
Sep 29, 2015 01:20 PM
CMRine04
RX-8 Parts For Sale/Wanted
3
Sep 23, 2015 09:31 AM
mattymack
New Member Forum
2
Sep 6, 2015 10:33 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:02 PM.