Help with CEL Codes!
#1
Registered User
Thread Starter
Help with CEL Codes!
Alright fellas. Hoping to get some help. - I got a CEL last night, car runs great. These are the codes that were read.
aaCatalyst efficiency monitor malfunction - bank 1. Probable cause:
aa1 - exhaust leak
aa2 - Check other service codes first
aa3 - faulty catalytic converter.
BTW: 2005 RX8 GT, 66k miles on it. Runs like a dream. A good dream that is. Averages 20 mpg.
__________________
aaCatalyst efficiency monitor malfunction - bank 1. Probable cause:
aa1 - exhaust leak
aa2 - Check other service codes first
aa3 - faulty catalytic converter.
BTW: 2005 RX8 GT, 66k miles on it. Runs like a dream. A good dream that is. Averages 20 mpg.
__________________
Last edited by iMotoPilot; 05-09-2012 at 01:50 PM.
#5
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 239 Likes
on
109 Posts
wcs, that looks like he is just copying text results.
iMoto (any connection to the race team?), that code usually only throws when your cat has failed or you have installed a midpipe. It means the ECU is seeing that the cat isn't filtering down the emissions properly.
If you have a cat on, and you are in the US and within the 8yr 80,000 mile federal warranty, go get the cat replaced at a dealer.
iMoto (any connection to the race team?), that code usually only throws when your cat has failed or you have installed a midpipe. It means the ECU is seeing that the cat isn't filtering down the emissions properly.
If you have a cat on, and you are in the US and within the 8yr 80,000 mile federal warranty, go get the cat replaced at a dealer.
#8
Registered User
Thread Starter
wcs, that looks like he is just copying text results.
iMoto (any connection to the race team?), that code usually only throws when your cat has failed or you have installed a midpipe. It means the ECU is seeing that the cat isn't filtering down the emissions properly.
If you have a cat on, and you are in the US and within the 8yr 80,000 mile federal warranty, go get the cat replaced at a dealer.
iMoto (any connection to the race team?), that code usually only throws when your cat has failed or you have installed a midpipe. It means the ECU is seeing that the cat isn't filtering down the emissions properly.
If you have a cat on, and you are in the US and within the 8yr 80,000 mile federal warranty, go get the cat replaced at a dealer.
#11
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 239 Likes
on
109 Posts
No, the sensor failing gives other errors, with a few being possible. My 8 is throwing the code for the rear O2 sensor "heater circuit voltage too low", i.e., it's cooked from my MM tune exhaust heat when I had the BHR midpipe on for ~40,000 miles. I'm ignoring it, because that tune and pipe are about to go back on, and it would just cook yet another sensor.
#12
no agenda
iTrader: (2)
Agreed. I just ignored the rest and focused on the text of the CEL, which does indeed match one of our CELs. I assumed the rest of the "aa" prefixed items were just search results that he pasted in, and whatever pasting method he used interpreted the leading bullet points as "aa".
Only available on the Android
#16
Registered User
Thread Starter
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM