Flashing CEL when the engine is OFF
08-25-2006, 10:28 AM
#1
Registered
Thread Starter
Join Date: Jan 2003
Location: CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Flashing CEL when the engine is OFF
I just installed a new radiator.
Driving around, no problem w/ the car at all. But when I initially put the car in the "on" position (engine is off), after a few seconds, the CEL flashes me, then stays solid again (back to normal). When I turn on the engine, everything is fine. No CEL, nothing.
Any clues? I tried the brake reset and the reset button holding reset, stills comes back on. Do I need to do some driving cycles?
Again, note, no CELs when the engine is running. Only when the engine is off and in "on" position.
Thanx!
Driving around, no problem w/ the car at all. But when I initially put the car in the "on" position (engine is off), after a few seconds, the CEL flashes me, then stays solid again (back to normal). When I turn on the engine, everything is fine. No CEL, nothing.
Any clues? I tried the brake reset and the reset button holding reset, stills comes back on. Do I need to do some driving cycles?
Again, note, no CELs when the engine is running. Only when the engine is off and in "on" position.
Thanx!
Thread
Thread Starter
Forum
Replies
Last Post
dbarber
Series I Trouble Shooting
14
07-25-2015 01:34 PM