I might be stepping out of my element a little bit here. I understand the interest in Phil's project and the wanting to know what is going on.

The question I want to put out there is can anyone name another vendor that gives the kind of information and insight into projects like this besides BHR? When was the last time you saw someone document a major project that wasn't done by someone on the BHR team?

I'm even putting together a little goodie of the ignition upgrade build process for everyone because we (BHR) want you all to see the kind of work and time that goes into your products. Not cause we enjoy talking about ourselves but because we want YOU, the customer, to know the backstory of the stuff you buy.

So, with that in mind please remember that we're providing you a service which you cannot find anywhere else regarding the RX8. Please consider this aspect before making demands on updates. Regardless we will continue to document the process as best as we can with what time we have.

We can't all be cool like Charles...the rest of us have day jobs too! ;)

There are several projects that Ray is into with my 8. Sometimes the shear volume of the mods makes me wonder when I will see my 8 again. I don't want to get into any of the mods in particular cuz the questions that may be asked may/will slow the process. I am trying to keep up with the mods on my Garage section of the Forum. Some of them listed are in the works and some are already done. When I get it back I will expect many questions about the performance. Questions about cost must be directed to Ray.

Ray got off to a very slow start (as he has already explained) and has to earn a living while working on my car. Yes I am paying for it but he does have other obligations. It is taking a lot longer than I contemplated but I keep thinking about how it will perform and look when he is done.

its easy - his name is Charlie- that makes him superhuman:) like the rest of us:)

Mis-spending my youth! Wish I could do it again.

Thanks man. It really is fun to come to work when you are passionate about what you do. I can't wait to have this conversation in a few years after you have been established.

Chas

I am a ridiculious testament that you can!!!:)
OD

So here is a couple of pics from today,,

Ray doing some rewiring of the new gauges,,
http://i59.photobucket.com/albums/g3...ilscar0012.jpg

Just a pic of the torn up engine bay,,,
http://i59.photobucket.com/albums/g3...ilscar0013.jpg


And I have an issue with Pettit's Supercharger.
If you look at the bolts that hold the Throttle Body on,, You'll see that the bolt holes are not true to the base of the throttle body. At least one of them isn't.
Look at the lower left bolt and how it's not lined up compared to the other 3. Pettit missed on the drill and tap of this hole.
http://i59.photobucket.com/albums/g3...ilscar0006.jpg

http://i59.photobucket.com/albums/g3...ilscar0001.jpg


Another thing is why did they turn the mount for the throttle body. They turned it 90 degrees. Why? The TB is rotated 1/4 turn to the left.

nice beanie Ray! ;)

If he did not wear something, the shine would blot out the pic:)

It's getting closer (i hope).

nice progress, looks like phil is going to need a good coat of zaino when its all done

Its like Franking-car lol

Best Catch Can EVER!!!!

I am rocking the same thing.

that silver stuff around the aircon hose - hope you are going to tidy that up . Sorry but it looks like ............like ..................... like ..................... words fail me

HooRAY for Home Depot!

$20 bucks vs $120....

Home depot has the black one; Lowes has the blue one.... heh

HD has the blue, also. I use it for what it was designed to do - trap water from my compressor!
Both places sell the same Chinese-made Campbell-Hausfield stuff, so color just depends on their purchasing department.

And you can get 2 of the proper can for $120 and not have a device with a glass component under your hood.

Hawaii and their lack of selection....:(

I'll get a good one; when I can get it made the way that I want.

Belittle my "catch can" if you will. It is small compact and easy to mount (the cost helped also but not the deciding factor). Yup, Lowe's special under $20.00 and works like a charm. I never saw one at Home Depot.

Yea that dammed aluminum duct tape deforms to easily over the foam. Guess I need to come up with a better idea. Need something reflective.

Don't know what Zaino is but if your referring to the dirty engine bay and such.........yea I will be kept busy for a long time cleaning it up.

I'm hoping the progress keeps up and I get my car back before the new year.

I just saw a post from Mazda Maniac that he raided the BHR facility and is selling everything at the Farmers Market.:uhh: Ray, look in the garage and check that I still have a car, motor and there are no missing parts:). Jeff may have lifted my s/c:lol:

Oh shit, i must make a bad boy thread about MazdaManiac and the supercharger he just shipped to me for 20$ and a bottle of Chianti? :)

I knew it.......he has always hated my s/c:)

I hear this car should be back in Vegas soon...

Nah. There's no money in that!:lol:

Balderdash!

So what am i to expect in the box? a knock off chinese turbo? :banghead:
i knew it! i shouldn't have ordered it from you! :lol: