Clubb

recently replaced the plugs and coils, as there were long over do. i didnt replace the wires. the wires were in fine shape, no heat damage ect. but on a 200 mile trip this past weekend i noticed some bogging when i was on the highway at the gas station i looked and my cat was glowing like crazy. now all i see is people going to the dealer getting charged $1000-1500. found my cat at autozone for $330 and a local shop here will do the install for $100. is there anything at all so special about the dealers parts/labor that would justify the extral possible thousand dollars?. p.s. before i get trouble over the spark plug wires NOT being replaced, im a electrician. i tested them. they are with out a doubt perfect.

Cheers
Clubb

Easy_E1

iTrader: (2)

how many miles are on your car? And what year is it?

TeamRX8

iTrader: (25)

The OE wires are rarely in fine shape, but that's your call

http://www.davesport.com/cgi-bin/davesport/DCAT100.html

The OE cat is ceramic and sustains damage easily. It is also grossly overpriced, but you do get a whole new cat pipe assembly rather than having to cut thd old one out and fab in a new one.

Depending on where you live and the local emissions requirements you may be required to use an OE cat to pass a visual inspection. The original OE cat also is warrantied for 80000 miles or a whole bunch of years (6?) which is what Easy may be alluding to.


.

laythor

if it's within the warranty then the replacement cat is free.

Dj-Trippwire

^ what he said

Clubb

its a 04 with 64k miles. i did a ohm test on the wires there fine for sure. i just don't want to get raped by the dealer for it. the replacements ive seen still have at least a 5 year warranty. i just wanted to make sure theres no real reason to go with the oem cat. since i can get the same probably better performance cat for less then half dealer price installed. although it will most likely be cutting the old one out and fabing in a new one. heres some im looking at http://www.autozone.com/autozone/cat...tic+&x=23&y=15

Ravioli

iTrader: (2)

Agency Power Cat-delete Midpipe...

Nuff' said.

Clubb

i would love to still pass inspections and admissions lol

Easy_E1

iTrader: (2)

You should have warranty on the catalytic converter. *year/80,000 miles mandated by the EPA. Why would you get an aftermarket cat?
Did th edesler say you don't have warranty?

Sisco360

Well seeing that my car is messed up as well and I will be checking the cat tomorrow this seems like a good deal to me. I am over 100 k so bye bye warranty. It says direct fit on their site so you guys think modding is nessesary?

Part Number: 55531

Weight: 16.0 lbs

Warranty: 5 YR

Notes: Ultra direct fitUltra converter, Federal and California Emission models. Not legal for sale on vehicles licensed in the state of California.

Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
Item cannot be shipped to the following States and Zip Codes.

States: CALIFORNIA

Rebate details: Purchase a Walker Direct Fit Converter or a Walker CalCat Converter from September 1, 2011 through October 31, 2011 and receive a $40.00 Mail-in Rebate Check



Plus a 40.00 rebate.. $289.00. Better than the stealership.

Ahh.. Here is the extension sold seperatly.. 59.99. Total price with cat and extension 359.99.

Part Number: 54699
Weight: 5.0 lbs
Notes: Ultra direct fit
Color / Finish: Aluminized
Inlet Connection Type: Pipe
Exhaust Outlet Connection Type: Pipe
Fitment: Direct OE Replacement
Internet Product Code (IPC): 2B7F6B13A88
Performance Item: Standard Replacement
Pipe Material: Aluminized Steel
Pipe Wall Maximum Thickness: Undisclosed

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today s emissions control needs, while developing solutions for tomorrow s challenges. Walker is a "one-stop" convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
•Walker premium pre-bent pipe is manufactured with 100% heavy-gauge aluminized steel for high corrosion resistance, providing longer service life.
•Walker premium pre-bent pipe utilizes OEM routing and hanger positions give you hassle free installation and the perfect fit, for easy installation.
•Walker premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
•Walker premium pre-bent pipe is designed with OEM type connections, to ensure a leak free seal

AirlockRX

Hey, how did the Walker Cat work out for you?