RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   Check Engine Light (https://www.rx8club.com/series-i-trouble-shooting-95/check-engine-light-221924/)

couvillz 08-21-2011 09:10 AM

Check Engine Light
 
My check engine light comes on for a few days at a time and then goes off again. I brought it to auto zone to get the code read and it says a critical HVAC error. Then it said something about ATC??? Does anyone know what that means? The light has been off for about a week and I have had zero issues while driving. I was curious if anyone else has seen this code?

ken-x8 08-21-2011 12:37 PM

Do you have the code number itself?

Ken

couvillz 08-21-2011 03:54 PM


Originally Posted by ken-x8 (Post 4059607)
Do you have the code number itself?

Ken

Ken,

I just found the receipt from auto zone and here is what it says:

P2259

HVAC system is reporting a critical error- torque reduction requested
Check ATC system for fault codes.

To add to all this, the computer thought that it was a Chrysler???

ken-x8 08-21-2011 05:27 PM

A lot of the codes are not universal, and vary from one make to another. According to the list of codes for the RX-8 (they're in a sticky at the top of one of these fora) that code is:

P2259 AIR solenoid valve control circuit low ON 2 CCM

and according to the shop manual has something to do with the secondary air injection (AIR)system.

There's a great pdf of the shop manual at

http://www.hi-impact.org/ryang/modif...8_manuals.html

and there's a page on this code and system in 04_EngineControl. The problem could be anything from a bad connection to a bad PCM.

Looking this much up pretty much exhausts my knowledge. Hopefully some of the more knowledgable members here can guide you further.

Ken

couvillz 08-22-2011 07:09 AM

Thanks Ken, I appreciate the help!

Zac

habibakoraganie 08-23-2011 01:08 AM

Hi everyone.

so my check engine light came on recently and i took my 8 to th auto shop for an ODB scan.
and the codes PO456 and PO442 came up. the guy at the shop told me it was a problem with the "canister purge valve". but when i went home and reseached it i noticed that many others got the same code and its a common issue with the gas cap not being tight (a glitch).

i also heard mazda fixes this glitch for free. but has anyone else had a canister purge valve problem? i think the guy was bullshitting just trying to grt me to pay for something, because the car runs great and nothing sketchy is going on when i drive it.

thanks

StealthTL 08-23-2011 01:26 AM

Could be as simple as the loose gascap, you don't have a location or the year of your car - has it been reflashed at the dealers?

The fix is a change to the computer program, but most cars in the US got it long ago....


All times are GMT -5. The time now is 01:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands