RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Trouble Shooting (https://www.rx8club.com/series-i-trouble-shooting-95/)
-   -   CEL plus won't go past 3k RPM (https://www.rx8club.com/series-i-trouble-shooting-95/cel-plus-wont-go-past-3k-rpm-188384/)

catalan 12-26-2009 09:49 PM

CEL plus won't go past 3k RPM
 
I own a 04 mt rx8 w/ 49.9k miles on it. Drove it this afternoon about 15 miles and the car ran just fine. Car sat about 5 hrs and when I started it, the CEL went on and it wouldn't go past 3k rpm. Drove it all the way home unable to go past 35mph w/ an average of 20-25mph most of the trip.

rx8montreal 12-26-2009 10:22 PM

check your cat.... may be dead

catalan 12-26-2009 10:33 PM

sorry im not really car savvy what exactly would distinguish if it's dead or not?

kingaaron 12-26-2009 10:38 PM

Are you going to check the CEL?

catalan 12-26-2009 10:40 PM

yeah i planned on taking it to autozone tomorrow to get the code checked

dannobre 12-26-2009 11:42 PM

Limp Mode...there are a few things it could be...

MOP, Drive by Wire system..throttle or Acc pedal

See what the CEL is and get back here :)

catalan 12-27-2009 12:02 AM


Originally Posted by dannobre (Post 3365744)
Limp Mode...there are a few things it could be...

MOP, Drive by Wire system..throttle or Acc pedal

See what the CEL is and get back here :)

Will do thanks for the advice. One question what does MOP mean?

catalan 12-27-2009 01:51 AM

Well, after letting the car sit again for a bit it drove just fine and the CEL went off on its own. If the CEL goes on again ill take it to autozone asap as long as theyre still open near my house.

josuar88 12-27-2009 01:57 AM

Maybe ssv valve?

catalan 12-27-2009 01:11 PM

Alright so the CEL went on again this morning and i took it to autozone and then it wouldnt start up. Checked the battery ended up being bad and still wouldnt start even after jumping it. The codes read on the CEL were 2258x2, 2260x2 and 2102. They told me these are mazda factory codes and were unable to pull it up on the system.

dozer 12-27-2009 01:13 PM

^google is your friend, so is the ^search function up top....ill help you out, im drunk and im happy

dozer 12-27-2009 01:15 PM

https://www.rx8club.com/series-i-tech-garage-22/rx-8-technical-info-cel-codes-pcm-pin-list-collision-guide-26291/

heres a sticky that came from the tech garage :fruit: all codes are listed on the first post, now figure out what you have

dozer 12-27-2009 01:17 PM

P2258 AIR pump relay control circuit high ON 2 CCM

P2260 AIR solenoid valve control circuit high ON 2 CCM

^i guess dannobre guess it right

catalan 12-27-2009 01:28 PM

searched through some threads and it said that the codes could be caused by a flat battery. So hopefully the charge he puts on my battery fixes this will post back after i go back to get my car. thanks dozer for the help

catalan 12-28-2009 12:31 PM

car is up and running again after getting the battery recharged and terminals cleaned out a bit. only about 50 miles so far since then so not too sure if the CEL will go off again. Will post back if it does. Thanks again for the help.


All times are GMT -5. The time now is 09:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands