Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

CEL brings engine code of Cylinder 1 misfire and O2 sensor

Thread Tools
 
Rate Thread
 
Old Feb 4, 2013 | 05:50 PM
  #1  
Michael Kelton's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 3
Likes: 0
CEL brings engine code of Cylinder 1 misfire and O2 sensor

I have a 2004 Mazda RX-8, I'm getting CEL codes of P0301, P2096, P2270, and it repeats codes of P0301 & P2096.
I work at a service shop and we just have a cheap scanner so it doesn't bring up the 4 digits codes. P0301 says misfire in cylinder 1 so I went online and seen where someone had specified as the front rotor. I don't like anything to be wrong with my car so I replaced the spark plugs with NGK Laser Iridium plugs, replaced the spark plug wires with IGN Magnecor plug wires, and replaced the coils with OE replacement coils ordered from O'Reilly's. Cleared the CEL, still have the same problem. However when I look under my hood it appears to what looks like the PCV hose is disconnected from the oil fill tube & my co-workers said replacing that could possibly solve my problem.

[IMG]https://www.rx8club.com/Name:  Qw4Wn6A.jpg
Views: 147
Size:  473.1 KB[/IMG]
Reply
Old Feb 4, 2013 | 05:52 PM
  #2  
Michael Kelton's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 3
Likes: 0


I'm kind of new so I'm still trying to figure out how to post an image.
Reply
Old Feb 4, 2013 | 06:10 PM
  #3  
wcs's Avatar
wcs
no agenda
iTrader: (2)
 
Joined: Feb 2005
Posts: 5,210
Likes: 66
From: Ontario
The 2004 model had a pcv? I don't think so

Learn to post a pic.

Just reconnect the hose!

Last edited by wcs; Feb 4, 2013 at 06:12 PM.
Reply
Old Feb 4, 2013 | 06:15 PM
  #4  
wcs's Avatar
wcs
no agenda
iTrader: (2)
 
Joined: Feb 2005
Posts: 5,210
Likes: 66
From: Ontario
Clean the ESS
Check compression
Check fuel pump

Should keep you busy.
Keep us updated please.
Reply
Old Feb 5, 2013 | 08:34 AM
  #5  
Michael Kelton's Avatar
Thread Starter
Registered User
 
Joined: Sep 2012
Posts: 3
Likes: 0
My co-worker is going to show me how to post a picture of it. But the hose is melted seems like where the previous owners have re-attached it and then possibly broke off again when they replaced the alternator. And we were under the impression that it didn't have a serviceable fuel filter, where is it located?
Reply
Old Feb 5, 2013 | 08:46 AM
  #6  
wcs's Avatar
wcs
no agenda
iTrader: (2)
 
Joined: Feb 2005
Posts: 5,210
Likes: 66
From: Ontario
Originally Posted by Michael Kelton
My co-worker is going to show me how to post a picture of it. But the hose is melted seems like where the previous owners have re-attached it and then possibly broke off again when they replaced the alternator. And we were under the impression that it didn't have a serviceable fuel filter, where is it located?
Fuel filter is locate on the fuel pump.
Fuel pump is located under the driver side passenger seat.
You'll need a special tool likely to remove the giant lock ring.
I don't believe the fuel filter is considered serviceable.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
92trbolzr
Series I Trouble Shooting
31
May 18, 2025 09:04 AM
Shankapotamus3
Series I Trouble Shooting
28
Mar 14, 2021 03:53 PM
Shnifty
Series I Tech Garage
23
Dec 18, 2015 12:49 PM
XianUnix
Series I Trouble Shooting
6
Sep 29, 2015 03:48 PM
Forevermore
Series I Trouble Shooting
6
Sep 20, 2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 03:15 PM.