Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

car stall at complete stop

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-07-2012, 02:00 AM
  #26  
ChillinRoD
 
ChillinRard's Avatar
 
Join Date: Dec 2009
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by GTX
UPDATE: Ok, so I took the car out today and the car did not stall on me when I come to a complete stop. At one point, i turn the car off and came back in in 15 mins and the car will not start. I let it sit for couple of hours and i was able to start it up and drove home. When I got home, I turn the car off and restart and it restarted right back up. I am completely stump now. I seem to got rid of the stalling issue but the car will not want to start back up. When it will not start, it sounds like I am not getting enough fuels in. Is it possible that the fuel pump is weak when it gets hot??? The car will start and run normal when it has been sitting there for couple of hours. ONly having the start up problem when the car is driven on the highway for a while (15 to 20 mins.).

Is it possible the fuel needs to be replace?
How often these fuel pumps goes bad?
IM HAVING THESE SAME PROBLEMS!!! EXTREMELY FRUSTRATING!! i still havent found a soulution is there anybody out there that knows what it could b??
Old 01-12-2012, 08:29 PM
  #27  
ChillinRoD
 
ChillinRard's Avatar
 
Join Date: Dec 2009
Location: Texas
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Alright guys well i invested in me a diagnostic tool scan my pcm having this rx8 for 2years im tired of going up to auto zone, after running it i got codes: P2070, P0302, P0420, and p0704. After doing lots of research going in n out of threads i see Intake Manifold tuning valve stuck open bank 1 is what is malfunctioning so ima pull that and clean it following a thread i found. I also found from code P0302 that i have a Cylinder 2 Misfire Detected, i believe that is a result of me having a bad ignition #2 coil is what the tool is saying, to cure this i will buy the BHR ignition kit, yes overkill but ive been eying it on here for a while that that Charles guy is selling because i been needing to change my wires and coils anyways, it seems to make a big difference so i will invest in it, if anyone have any info or suggestions on it speak up im still learning so im ALL EARS! Based off what ive said if u got anything else to help out it'll b greatly appreciated seeing that i cant drive for 10 to 15 miles without it killin on me and fouling the plugs and having a etremly hard time cranking up! Wish me luck my 8 is too clean to b sittin in the garrage

Mod Notice to Poster:
13. Multiple posts about the same thing across many forums are considered "spamming" the site and may result in the poster being banned. (alnielsen)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skyl3r
New Member Forum
148
12-02-2019 04:51 PM
Jesus Martinez
Series I Tech Garage
42
03-23-2016 09:08 PM
Quato_jr
New Member Forum
4
08-04-2015 09:22 AM
marc2820
New Member Forum
6
07-26-2015 10:47 PM
T_Mags
New Member Forum
9
07-24-2015 11:29 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: car stall at complete stop



All times are GMT -5. The time now is 10:33 AM.