Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

A/C Screatch

Old Aug 22, 2006 | 11:34 PM
  #1  
farinj's Avatar
Thread Starter
FarinJ
 
Joined: Aug 2006
Posts: 16
Likes: 0
From: Newark, DE
A/C Screatch

04 Manual with 35K on it.

I start my car after work, roll down the windows and drive for a little bit then turn the A/C on.

When I turn the A/C on I hear a short screatch. The A/C works fine but I was curious if this is something I need to be concerned with.

I didn't notice it last summer.

Thanks
Reply
Old Aug 23, 2006 | 12:33 AM
  #2  
BoosTED's Avatar
Registered
iTrader: (2)
 
Joined: Dec 2004
Posts: 2,896
Likes: 2
From: Minneapolis, MN
Belt sounds like it needs adjustment on the front of the A/C condensor

Too loose.

How many miles are on the car?
Reply
Old Aug 23, 2006 | 04:03 PM
  #3  
farinj's Avatar
Thread Starter
FarinJ
 
Joined: Aug 2006
Posts: 16
Likes: 0
From: Newark, DE
35,000 miles I just had the 30,000 mile service done to it. I was thinking belt but wanted to see if anyone else had an issue.

Thanks, belts can be fixed easy enough.
Reply
Old Aug 25, 2006 | 07:26 PM
  #4  
Adamrotor's Avatar
Sonic the Hedghog
 
Joined: Mar 2004
Posts: 611
Likes: 0
From: EVOLV-Chicago
I did but it only happened like 3 times at most havent heard since 30k here.
Reply
Old Aug 25, 2006 | 09:12 PM
  #5  
7andan8's Avatar
Obsessive Paint Polisher
 
Joined: Aug 2005
Posts: 765
Likes: 3
From: Lynchburg, VA
Mine does the same thing, but only every now and again. Surely when I take it to the dealer for a looks see ... it won't do it.
Reply
Old Aug 25, 2006 | 09:23 PM
  #6  
AlexCisneros's Avatar
Registered User
 
Joined: Nov 2003
Posts: 1,223
Likes: 1
From: San Antonio, TX
ac clutch maybe?

ProblemI have is that I have the UR pulley kit, soI doubt it's covered
Reply
Old Aug 25, 2006 | 09:23 PM
  #7  
MedicineMan's Avatar
Registered User
 
Joined: Oct 2004
Posts: 120
Likes: 0
From: East Texas
Mine's done it, too but it seems to work ok in these 103 degree days that we've been having. First time I heard it, I was somewhat startled because it really didn't sound like a loose belt but more like the compressor had been locked up.
Reply
Old Sep 8, 2006 | 11:44 AM
  #8  
farinj's Avatar
Thread Starter
FarinJ
 
Joined: Aug 2006
Posts: 16
Likes: 0
From: Newark, DE
It has cooled off up hear in DE over the last few weeks and I haven't heard it at all. I believe it was definitly something to do with the heat we were having.

Thanks for the feedback.
Reply
Old Sep 8, 2006 | 01:12 PM
  #9  
BoosTED's Avatar
Registered
iTrader: (2)
 
Joined: Dec 2004
Posts: 2,896
Likes: 2
From: Minneapolis, MN
If it is hot out the belt will get bigger.

When it is cold the belt will constrict...

Get your belts adjusted, a loose belt will cause more wear to it.

To check twist the belt if it can turn perpendicular (90 degrees) to its normal position then it needs to be tightened.

This is even more important on UD pulleys since there is less surface area than the normal pulley.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RevMeHarder
New Member Forum
8
Jun 1, 2026 02:30 PM
nadodave
Series I Trouble Shooting
10
Aug 28, 2019 05:55 AM
Warrior777
RX-8 Parts For Sale/Wanted
207
Jun 24, 2019 04:47 PM
djp6783
RX-8's For Sale/Wanted
0
Sep 19, 2015 12:12 PM
mazdaverx7
Series I Tech Garage
3
Jul 21, 2015 07:31 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 02:20 PM.