wallbro 400lph in rx8?
Thread Starter
Registered
Joined: Nov 2012
Posts: 128
Likes: 1
wallbro 400lph in rx8?
ohelloo
i swap the engine to 13brew and i dont know ..cant use the oem rx8 canister to new wallbro 400lph? i made a new line for primary fuel and the oem line i change for return ! to the tank!
i swap the engine to 13brew and i dont know ..cant use the oem rx8 canister to new wallbro 400lph? i made a new line for primary fuel and the oem line i change for return ! to the tank!
Rotary Evolution
Joined: Oct 2011
Posts: 853
Likes: 2
From: Central FL
you can use whatever, but of course modification is required and would have to somehow incorporate the sump for the other tank.
if it were me i would use an OE pump for the sump and the 400 for the pressure feed. of course you would have to ditch the spring loaded scavenge tank on the OE housing.
if it were me i would use an OE pump for the sump and the 400 for the pressure feed. of course you would have to ditch the spring loaded scavenge tank on the OE housing.
Last edited by Karack; Aug 4, 2013 at 08:17 PM.
Thread Starter
Registered
Joined: Nov 2012
Posts: 128
Likes: 1
you can use whatever, but of course modification is required and would have to somehow incorporate the sump for the other tank.
if it were me i would use an OE pump for the sump and the 400 for the pressure feed. of course you would have to ditch the spring loaded scavenge tank on the OE housing.
if it were me i would use an OE pump for the sump and the 400 for the pressure feed. of course you would have to ditch the spring loaded scavenge tank on the OE housing.
you no have a picture ! ?? to see the modification!
Thread
Thread Starter
Forum
Replies
Last Post
