Testing this week for Rx-8 ZTek Exhaust in Sacramento FREEBIES!!
09-01-2006, 02:17 AM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Testing this week for Rx-8 ZTek Exhaust in Sacramento FREEBIES!!
Hi all you Rx-8'ers,
We are doing a test fit and vid session for the ZTek Rx-8 Cat-back Exhaust in Sacramento and we need a local Rx-8 from norcal to volunteer their car for the day. Anyone that would like to can call 1-866-Zero-Tek and ask for Lance or my direct line at 916-717-8151. There will be some FREEBIES *wink *wink when you particpate in the session.
ps -- I'll post the vids, sound clips and pics here for you viewing pleasure when it gets taken care of.
Cheers!
We are doing a test fit and vid session for the ZTek Rx-8 Cat-back Exhaust in Sacramento and we need a local Rx-8 from norcal to volunteer their car for the day. Anyone that would like to can call 1-866-Zero-Tek and ask for Lance or my direct line at 916-717-8151. There will be some FREEBIES *wink *wink when you particpate in the session.
ps -- I'll post the vids, sound clips and pics here for you viewing pleasure when it gets taken care of.
Cheers!
09-28-2006, 01:18 AM
#3
Registered
Originally Posted by Fearsomefatman
I saw your exhaust on ebay, I am in california, otherwise I let you use my car... anyways, looking forward for more info on this
i would let you guys use my car, depends on the date though? let me know whats up.
09-28-2006, 02:02 AM
#4
Registered User
Join Date: Sep 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm..... Interesting, weighing in at 15lbs ??? That's light! Anyway can Ztech confirm the weight? Is this the muffler weight only not including the pipe from the catback or the whole catback system?? Your ebay pic shows only the muffler. Thanks...
09-28-2006, 02:07 AM
#5
Originally Posted by SilverArrow8
Hmmm..... Interesting, weighing in at 15lbs ??? That's light! Anyway can Ztech confirm the weight? Is this the muffler weight only not including the pipe from the catback or the whole catback system?? Your ebay pic shows only the muffler. Thanks...
ebay link?
beers
09-28-2006, 04:29 AM
#7
Originally Posted by 4 years to Supercharge
thx,
found it already,,, but how do they have a dyno and hp gain #s, but need a car for fit and video???
i am up for any product that helps... but
some photos would be nice.... and what is the diamater of the back pipe???
beers
09-28-2006, 04:50 AM
#8
The King Of Kings.
Join Date: Jun 2005
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
well I am in the central coast... sacramento is a bit of a long *** drive for me, and yeah I need specs on this, weight? meassurement? sound?
if it's just the muffler without pipes then the price sucks A#$....
if it's just the muffler without pipes then the price sucks A#$....
09-28-2006, 05:42 AM
#9
Originally Posted by swoope
thx,
found it already,,, but how do they have a dyno and hp gain #s, but need a car for fit and video???
i am up for any product that helps... but
some photos would be nice.... and what is the diamater of the back pipe???
beers
found it already,,, but how do they have a dyno and hp gain #s, but need a car for fit and video???
i am up for any product that helps... but
some photos would be nice.... and what is the diamater of the back pipe???
beers
09-28-2006, 08:54 AM
#10
Registered User
Join Date: Sep 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by swoope
thx,
found it already,,, but how do they have a dyno and hp gain #s, but need a car for fit and video???
found it already,,, but how do they have a dyno and hp gain #s, but need a car for fit and video???
If you look at the post, it was on the 1st Sept so it's been almost a month. Will Ztech please post more details....
09-28-2006, 09:05 PM
#12
The King Of Kings.
Join Date: Jun 2005
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Silverarrow
hmmm...maybe someone should call him??
03-05-2007, 02:37 PM
#14
Registered User
Thread Starter
Join Date: Mar 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Sorry all for the long delay, we had some warehouse troubles but it finally got sorted out and we are on for a fitting and video session asap. Anyone in the Sacramento area that would like to participate please let me know asap 916-717-8151 or 1-866-zero-tek. Cheers!
PS - Just posted some pics, and the system is a easy R&R for the stock mufler and I can give special pricing for rx8club members. Also it includes our signature lifetime warrenty and money-back satisfaction guarentee on the system.
PS - Just posted some pics, and the system is a easy R&R for the stock mufler and I can give special pricing for rx8club members. Also it includes our signature lifetime warrenty and money-back satisfaction guarentee on the system.
Last edited by lance@ZTek; 03-05-2007 at 06:43 PM.
03-06-2007, 10:17 PM
#16
Registered User
Thread Starter
Join Date: Mar 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Just completed the install on the Rx-8 and it looks and sounds awesome! Nice, Deep and Throaty, but not too loud. Makes the rotoary engine sound deep and ferrai-ish, like mazda should have done straight outta the factory.
Idle sounds clean, and cruising on the hwy is very stock sounding with ZERO resonance and ZERO droning, but when revving and hard acceleration the car really wakes up.
Here are some sound clips, the exhaust sound 100 times better in person, sound clip cannot really capture the deeper more bassey sound that the exhaust sounds like in person, but it gives you an idea how it sounds.
http://site.zerotek.net/ZTek-Rx8-Startup.wmv
http://site.zerotek.net/ZTek-NSX-Rev-2.wmv
http://site.zerotek.net/ZTek-Rx8-Rev1.wmv
http://site.zerotek.net/ZTek-Rx8-Rev2.wmv
Idle sounds clean, and cruising on the hwy is very stock sounding with ZERO resonance and ZERO droning, but when revving and hard acceleration the car really wakes up.
Here are some sound clips, the exhaust sound 100 times better in person, sound clip cannot really capture the deeper more bassey sound that the exhaust sounds like in person, but it gives you an idea how it sounds.
http://site.zerotek.net/ZTek-Rx8-Startup.wmv
http://site.zerotek.net/ZTek-NSX-Rev-2.wmv
http://site.zerotek.net/ZTek-Rx8-Rev1.wmv
http://site.zerotek.net/ZTek-Rx8-Rev2.wmv
Last edited by lance@ZTek; 03-10-2007 at 05:50 PM.
03-07-2007, 10:35 AM
#21
Photochoppisticianista
Join Date: Feb 2007
Location: Seattletown
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lance@ZTek
Just completed the install on the Rx-8 and it looks and sounds awesome! Nice, Deep and Throaty, but not too loud. Makes the rotoary engine sound deep and ferrai-ish, like mazda should have done straight outta the factory.
Idle sounds clean, and cruising on the hwy is very stock sounding with ZERO resonance and ZERO droning, but when revving and hard acceleration the car really wakes up.
Here are some sound clips, the exhaust sound 100 times better in person, sound clip cannot really capture the deeper more bassey sound that the exhaust sounds like in person, but it gives you an idea how it sounds.
Idle sounds clean, and cruising on the hwy is very stock sounding with ZERO resonance and ZERO droning, but when revving and hard acceleration the car really wakes up.
Here are some sound clips, the exhaust sound 100 times better in person, sound clip cannot really capture the deeper more bassey sound that the exhaust sounds like in person, but it gives you an idea how it sounds.
If anyone in Sac wants to hear it for themselves, PM me. I'll try to post some more pics of those tips by this weekend, too.
Last edited by konradk; 03-07-2007 at 10:45 AM.
03-07-2007, 03:24 PM
#22
Registered User
Thread Starter
Join Date: Mar 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 4 years to Supercharge
Not sure if he is allowed to post a price before becoming a vendor but he could say how much of a discount. 
The tips look good from the pic. Are they double walled?
The tips look good from the pic. Are they double walled?
PS- If i get enough interest, after the few we have left in stock sell out, I will be running a paid Group Buy.
03-08-2007, 12:31 AM
#23
Originally Posted by lance@ZTek
PM me for the discount price. And yes they are double walled, fully polished stainless steel, Much larger and better looking than the stock setup.
PS- If i get enough interest, after the few we have left in stock sell out, I will be running a paid Group Buy.
PS- If i get enough interest, after the few we have left in stock sell out, I will be running a paid Group Buy.
beers
