Do I need to change oil right after Sea-Foaming?
#1
Pain Is Weakness
Thread Starter
Join Date: Oct 2008
Location: Miami
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Do I need to change oil right after Sea-Foaming?
I will be Sea-Foaming my car between tomorrow and Friday i would like to know if it is necessary to change my oil right after or can i run the car with this stuff in it. I plan on putting it through the vacuum line, and some in the gas tank. Any input would be greatly appreciated, Thank You.
#3
RX-Heaven
iTrader: (6)
^^the man is right..he seems to always have the right answer... but at any rate, the reason is that because teh sea foam is not getting into your oil and into the combustion chamber only, it is not necessary to change your oil. you oil will not be contaminated by the seafoam.
#5
INDY RX8 CLUB - Officer
It can dillute and enter your oil... ever seen the oil after using the water method? milky... I can smell the sea foam in the oil after I do it. One can probably wont hurt, but I have to disagree with swoope on this one from personal experience. You should change it.
#7
Lubricious
Join Date: Oct 2003
Location: SF Bay Area, California
Posts: 3,425
Likes: 0
Received 4 Likes
on
4 Posts
Why not follow the TSB procedure, get it into the chambers and let it soak? Running it through the engine via vacuum line might create a nice smoke show, but doesn't give it much time for softening carbon deposits in the seal grooves.
#9
Pain Is Weakness
Thread Starter
Join Date: Oct 2008
Location: Miami
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Okay i just check the TSB, the one that i have says to put it through the VAC line. Could you send me the link to the TSB you are referring to, i have a feeling mine is incomplete.
#10
Rotary Powered Countryboy
I know of ppl taking out the plugs and putting some in the plug holes also drawing some through the vac lines and letting it sit over night then firing it up!
#11
Zoom-Freakin'-Zoom
iTrader: (5)
It can dillute and enter your oil... ever seen the oil after using the water method? milky... I can smell the sea foam in the oil after I do it. One can probably wont hurt, but I have to disagree with swoope on this one from personal experience. You should change it.
it the best method were to be done would be to seafoam it just before you needed to change the oil.. but that is just me..
beers
Thread
Thread Starter
Forum
Replies
Last Post