Hesselrode

iTrader: (3)

"Installed the OMP, and its great! I replaced the washer fluid tank with 2 smaller ones I purchased at Princess Auto. Had to custom make a braket that could hold both tank, then to screw it in at the same holes where the washer tank originally was. I then put the sensor for the washer tank in the premix tank so I could get a warning that it is almost empty. We did 2 RX-8 the same day, took about 10 hours (5 for first one and 3 for second one). Pretty much we winged it. Looking at this guide, its exactly what we did. The bolts are a bitch though (pardon my language)."

From www.rotaryinsider.com

RX8Soldier

iTrader: (24)

Do you have pics of the install?

And, this shouldn't be in the DIY froum (nor should your other one. Read the sticky "What belongs in this forum").

Hesselrode

iTrader: (3)

No pics, he just described it but do you have a sensor on your wash tank that tells when it is low?

Hesselrode

iTrader: (3)

BTW I did read that before and I completely forgot. I wouldn't mind if the moderators moved it.