Quick Question - AuxMod install
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: NorCal
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Quick Question - AuxMod install
Hey, I'm in the process of wiring up my Sirius to a modified Tape/MD 1/8" output. I was looking under the dash to take out the bolt for the headunit, and it appears there is no bolt. I can see the two lower bolts that are clearly not involved with the headunit, then I see a hole where a 10mm bolt could easily fit, about 2-3" above the lower bolts. I got the car used, so it's conceivable somebody worked on it before.
Questions:
a) am I really missing a bolt, or just blind/stupid?
b) if I'm missing the bolt, is it a problem?
Thanks for any input,
Noah
Questions:
a) am I really missing a bolt, or just blind/stupid?
b) if I'm missing the bolt, is it a problem?
Thanks for any input,
Noah
#2
Registered User
Join Date: Nov 2003
Location: in the moment
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Did your head unit come out? If so, the bolt is missing. The head unit will not come out with the bolt in place. People are reporting the bolts seem to have been only hand tightened - at least mine was and it was easily removed and I only hand tightened it when I put it back in. Maybe it fell out?? Doesn't seem likely though...
Anyway, I don't think the missing bolt is a problem. The unit is secured by the plastic clips of the front face and the two screws behind the ashtray. Unless it creates a noise - squeaking etc., you should be fine.
Anyway, I don't think the missing bolt is a problem. The unit is secured by the plastic clips of the front face and the two screws behind the ashtray. Unless it creates a noise - squeaking etc., you should be fine.
Thread
Thread Starter
Forum
Replies
Last Post
badinfluence
Series II Aftermarket Performance Modifications
6
08-31-2015 11:51 AM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
cschoeps
RX-8's For Sale/Wanted
0
08-06-2015 12:44 PM
MolecularConcept
New Member Forum
15
08-05-2015 04:43 PM