Problem removing bolts behind the cat: hangar in the way?
Guest
Posts: n/a
Problem removing bolts behind the cat: hangar in the way?
I'm installing a new cat-back, and I'm stuck on the second bolt behind the cat. The hangar seems to be right in the way and I can't get my ratchet back there. I'm sure many of you have seen this when you installed new cat-backs. Just wondering what the remedy is for this. Thanks in advance.
I have never ran into this problem.
I've always had plenty of room for a ratchet and deep socket.
Can you use an extension to get around the hanger?
Maybe use a swivel with it too?
I've always had plenty of room for a ratchet and deep socket.
Can you use an extension to get around the hanger?
Maybe use a swivel with it too?
deep socket ftw.
remember when u shop for deep socket, buy the impact ones, even you dont have an impact/air tools.
those thing will last forever, you can abuse the **** outa it and it will still work.
remember when u shop for deep socket, buy the impact ones, even you dont have an impact/air tools.
those thing will last forever, you can abuse the **** outa it and it will still work.
Registered
iTrader: (4)
Joined: Aug 2004
Posts: 12,255
Likes: 8
From: Buddhist Monastery, High Himalaya Mtns. of Tibet
^^true... I usually get away with a breaker bar, but even that can still involve cursing 
And like alnielsen said... 6-point. Never use a 12-point on a 6-point where a good amount of torque is required.
And like alnielsen said... 6-point. Never use a 12-point on a 6-point where a good amount of torque is required.
Thread
Thread Starter
Forum
Replies
Last Post
xAgyex
Series I Trouble Shooting
24
Jul 26, 2025 01:15 PM
8is>enuff
NE For Sale/Wanted
4
Sep 3, 2015 07:57 PM