OMP Oil Metering pump output and modification - Page 13

Feb 5, 2025 | 04:47 AM

#301

dmarkmd5

Registered

Joined: Apr 2024

Posts: 7

Likes: 0

Quote:

Originally Posted by TheAMAZINGNorad

Jackpot. Got all of the papers plus a few others (I e-mailed the author directly and he responded pretty fast). They are in a Google Drive folder which contains the following.

Oil Transport Cycle Model for Rotary Engine Oil Seals 2014-01-1664
Modeling of the Rotary Engine Apex Seal Lubrication 2015-01-2035
Visualization of the rotary engine oil transport mechanisms 2014-01-1665
Predicting Gas Leakage in the Rotary Engine—Part I: Apex and Corner Seals 2016/6/1
Predicting Gas Leakage in the Rotary Engine—Part II: Side Seals and Summary 2016/6/1

Here is the link: https://drive.google.com/open?id=1P9...NOMZ7SKFhRJVIC

Let me know if you have issues getting into here. I'll be off reading these during lunch!

Anyone still have these papers on hand? The link is now dead.

Also, using versatuner i've made the omp map linear and higher at the top on my S2. Although I have very little idea what the map table values refer to. They peak at 1600 on one and 380 on the other table. I'm going to assume they're cc/hr which would align with earlier recording of 1600cc/hr via the s1 omp stock pump rates.