New 8 owner - Quick Q's
#1
New 8 owner - Quick Q's
So I just got my 8 a couple of months ago with a replaced engine 10k ago. Just had a couple of odd questions:
1) I found a hose that goes from right in front of the throttle body under the UIM that is not connected to anything - is this normal?
2) Also noticed that this pulley randomly starts spinning and stops spinning at idle (in picture circled in black)
and finally I've noticed that after stopping often times the car shakes gently and stops, this keeps repeating when I'm idling. It's nothing crazy just a tiny bit shaky and when it does shake the idle drops a teeny bit. Could this be the motor mounts or a dirty MAF?
Pics:
http://i699.photobucket.com/albums/v...-13-25_811.jpg
http://i699.photobucket.com/albums/v...-30-36_312.jpg
Thanks in advance!
1) I found a hose that goes from right in front of the throttle body under the UIM that is not connected to anything - is this normal?
2) Also noticed that this pulley randomly starts spinning and stops spinning at idle (in picture circled in black)
and finally I've noticed that after stopping often times the car shakes gently and stops, this keeps repeating when I'm idling. It's nothing crazy just a tiny bit shaky and when it does shake the idle drops a teeny bit. Could this be the motor mounts or a dirty MAF?
Pics:
http://i699.photobucket.com/albums/v...-13-25_811.jpg
http://i699.photobucket.com/albums/v...-30-36_312.jpg
Thanks in advance!
#4
FULLY SEMI AUTOMATIC
iTrader: (9)
from your pics it looks like you have ms/aem intake? is so your vfad was removed. as long as that vac line is capped you should be fine
#6
FULLY SEMI AUTOMATIC
iTrader: (9)
pull that hose off the bottom of the tb and push a vac cap on there
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM