Need a quick response regarding seafoam!
02-25-2012, 01:19 PM
#1
Registered User
Thread Starter
Need a quick response regarding seafoam!
My cars been having some hesitation issues and rough idle for a while, got BHR coils on the way so I wanted to get this done before I put them on...
I am reading through the whole seafoam DIY thread but havent seen anything about this yet...
I am premixing so I have a bottle of amsoil ready to use after the seafoam.
Question is: after the seafoam has soaked for an hour or so, can I pull the oil into both nipples at the same time?
There is a note in the MAZDA TSB that says not to put seafoam into both ports at the same time, but what about the oil? I was just gonna put 4oz of the oil in a cup with both tubes and let it pull in what it needs?
I am reading through the whole seafoam DIY thread but havent seen anything about this yet...
I am premixing so I have a bottle of amsoil ready to use after the seafoam.
Question is: after the seafoam has soaked for an hour or so, can I pull the oil into both nipples at the same time?
There is a note in the MAZDA TSB that says not to put seafoam into both ports at the same time, but what about the oil? I was just gonna put 4oz of the oil in a cup with both tubes and let it pull in what it needs?
02-26-2012, 12:55 PM
#2
read this: https://www.rx8club.com/series-i-do-yourself-forum-73/new-sheriff-diy-town-228395/
for the quickest response, posting it in the proper area is essential
for the quickest response, posting it in the proper area is essential
Thread
Thread Starter
Forum
Replies
Last Post