islandsoul

ok this is my first post out of simple need. i purchased my 8 in 10/10/03 and have been keeping up on this forum for months before that even. the reason i never posted is because of all the bashing, but my love for the car has brought me to this. my 8 wouldn't start after work this morning at 1 am after it was raining hard all day at first i thought is was a flood like many others have experianced, but as i looked closer the oil preasure meter on the low line. i checked the oil and the dipstick read 3/4 full. then i tried to start it again and all i got is some ticking sound. any help is much appreciated at this time for i am now at home with my friends honda on loan and i miss my 8 after just 6 hours.

guy321

ticking sound? maybe you are having a starter/relay issue?

guy321

Also, could bea low batt issue? did you leave your lights on?

Try push starting your car (if it's an MT?) in either case it may work

islandsoul

i have a mt and the batt seems strong. lights weren't left on. but what concerns me is that the oil level on the dipstick is different than the gauge.

guy321

That guage is not indicative of what is on your dip stick. One is oil pressure, one is oil level.. I am not sure when the oil pressure guage comes "on" but it may be showing low because you cant start your car.. not the other way around.

guy321

clicking when you turn your ignition is (to me) usually an indication of low battery or bad starter/relay....

You could try having a couple buddies push you with the ignition on, then pop the clutch..

islandsoul

thanks so much for the input. have you tried this method yourself? if all else fails i gotta get it towed to jn mazda

islandsoul

i got the honda for only 4 more hours and i live hour away from work where the car is and i didn't sleep yet, but the 8's priority! Leaving to try your idea in min. guy 321 much mahalo's

guy321

Yep, i've started my car when I had clicky noises (i had a low battery.) If it is a starter you'll still need to get it to a dealer though.

agoodcave

Oil pressure does not build until the engine starts. It will always read no/low oil pressure until started.

As to your starting problem. Did the engine ever turn over at first, or just the clicking. If it turned over (cranked) but didn't start, then its flooded. If it just clicked, then its electrical and push starting it should do the trick.

If you push start it, remember to have the ignition key in the on position and in 2nd gear.

Mike

guy321

It needs to be in 2nd gear? I did mine in 1st.

StealthTL

iTrader: (1)

Does sound like a dead battery, may be just a bad connection.

Turn the lights on, then try to start. If the lights go out, its electrical, (battery or bad connection) if they don't go out and starter just clicks, it's a starter issue.

Either way, a good push should do it.\

S

r0tor

iTrader: (1)

sounds like a dead battery... jump start it or push start it and get a new battery