Could someone take a look at their inner fender well and tell me if the edge of the plastic inner fender runs around the lip or tucks in behind the lip of the fender. Part of mine is on the inside and part is on the outside. Thanks

 

picture?

 

Remove the fasteners, tuck the liner in under the fender edge and reinstall the fasteners. Someone may have had the front bumper cover off the car and didn't reinstall the liners correctly.

To remove the fasteners, turn the center piece 1/4-1/2 turn counterclockwise with a phillips screwdriver applying very light pressure. Then with a fingernail under the center piece pop the fastener out. When reinstalling just insert the outer piece in the hole and press in the center piece.

 

Can someone post some pics of their fender edge. It looks to me like part goes on the outside and part on the inside . Thanks

 

Your right, this is the best I can do.

 

Thanks expo1....