Flow Master 44
02-15-2010, 02:56 PM
#1
Trained true Killers
Thread Starter
Flow Master 44
Just finished up on my install of a flow master 44 the sound is amazing not rasspy like most fart tubes on the market it has a deep exotic sound to it just woundering if any other 8 owners are running a flow master system. A little tricky to install but well worth the uniqe sound. I will upload a video on you tube if it draws enough intrest.
02-15-2010, 03:13 PM
#4
Trained true Killers
Thread Starter
I am geting ready to post pics looks dirty just left my buddys shop in the snow and ice you will see that I have removed the exhaust tip ports and I am using a black Alum mesh to fill the space kind of like a track look but I need the temp to hit 50's first so I can use the right epoxy.
02-15-2010, 03:40 PM
#9
Trained true Killers
Thread Starter
The sound is deep and mellow almost like a well tuned 911 Untill you hit 8grand then it starts in with a strong whistle the coolest sound I have ever herd on an 8 Flow Master knows what sounds good they have been at it for a long time I dont think they ever intended to have one on a RX8 but I was raised by an old school street rodder so it was just instinct to try and fit a flow master on
02-15-2010, 03:47 PM
#10
Trained true Killers
Thread Starter
The tip faces out to the back on the drivers side it not as low as it looks I went over the speed bump on my road no problems Affter the mesh is installed you will only see a small part of the tip facing down . The bumper will look soild with no exhaust holes. I couldent find a solid bumper on line the all had two tip ports on them so I am making my own out of the stock one
02-15-2010, 03:58 PM
#13
SARX Legend
iTrader: (46)
Oh, so the factory shroud doesn't fit? Seems like that muffler should fit the same way teh racing beat race exhaust does.
http://www.gerhardstein.net/rx8/exha...terconnect.jpg
http://www.gerhardstein.net/rx8/exha...terconnect.jpg
02-15-2010, 04:00 PM
#14
Trained true Killers
Thread Starter
only thing done on the exhaust do plan on test pipe when the car is less of a daily driver. I dont want to rattle my head to much it sounds perfect as is. I had to make a run to the auto parts store in the middle of the install with out a muffler and it was stupied loud. They say only a few Hp gained with no cat any way I take a smooth sound over a few pony's
02-15-2010, 04:04 PM
#15
Trained true Killers
Thread Starter
well it dose but I had to use di grinder to round out a slot looked good but I hate empty tip ports looks cheap to me thats why I wish I could find a solid bumper so people who like hidden exhaust had a better option
02-15-2010, 04:10 PM
#16
Trained true Killers
Thread Starter
You can realy make this fit any way you want just depends on how much welding you want to do. I am a Tig welder in stainless and Alum and pre welded my bends at work to go in that direction I just like hidden exhaust
Last edited by the1jesster; 02-15-2010 at 04:11 PM. Reason: left out
