ill have to wait till the end of the week when it warms up. theres not enough fle in the airhose to remove it ad the box doesnt move enough with it on.
Thanks for the help

It's a pain in the butt to get off at 80F...

cant get it past the wire that goes overtop of where it goes into the front of the car.Is there any other way to get it off? removing the mount its in maybe?

??? Photo plz

If you're talking about the VFAD sensor just unclip the wire.

http://s1089.photobucket.com/albums/...t=DSCF2448.jpg

the wire on the front is in my way. I cant get the box past the clip the wire is in

Yea...so you got the front grommets out...now you just need to pop the two in the rear and you should be able to take it out that way.

theres grommets at the rear? how do i get them out

pull straight up

got the airbox off. Power steering connectors look good no loose wires. Whats my best bet for fixing this problem? can i test the wires for connectivity or something? or should i just clip them and put new connectors on? relocation maybe?

unplug it, spray the whole thing with electric contact cleaner and put it all back together.

if you want to figure out the pinouts you can test it with a multimeter

Thanks everyone for the help. Go the airbox out, cleaned the plugs with connection cleaner and heat shrinked them. Power Steering is good to go.
Still have ABS code C1290 though. Anyone know if you can replace the ABS pressure sensor by itself? I can only find the whole module for sale but the sensor bolts on so they should be available seperate i think.

Glad we got one of them goin. No clue about the ABS though...sorry