ballistc

i looked for one but i couldnt find any DIY for this

http://www.boomplustoys.net/images/J..._Dam_Skirt.jpg


if there is one on this forum,
can anyone give me a link to it? =/

kersh4w

iTrader: (3)

its pretty self explanatory, i put mine on with no instructions.

btw, buy it on ebay. it'll be a lot cheaper. that site wants $630 for the front lip which is just stupid.

also, if you buy it new, it'll come with instructions.

its pretty much 6 bolts that go through the front bumper. and then sticky double sided 3m tape.

cjkim

very easy.
take off front bumper.
remove screws that retain stock air dam (i think it's 4 plastic tabs and 2 metal screws)
drill holes for the 6 bolts (they're premarked with a X on the inside of the bumper)
I believe it's a 7 mm drill bit
Line it up, take off the 3M tape. Tighten bolts with the 6 nuts provided and reinsert the 4 plastic tabs.
Make sure the 3M is stuck on tight. Reinstall bumper.

ferg

do you really have to take the bumper off

heyarnold69

iTrader: (1)

taking off the bumper is easy???

kersh4w

iTrader: (3)

yes you do.

the lip replaces that black piece of plastic in the middle.

Icemark

very very easy...

kersh4w

iTrader: (3)

yeah, takes 15 minutes or less.

cjkim

or a DIY... check the section
it really does take 15 mins, first time... as long as you can unscrew a couple bolts and lift.

04RX8man

yeah bumper is about 15 or 20 minutes if you know how to and not just TRYING to figure it out!

EDZRIDE

iTrader: (1)

This would be a good time to add Racing Beat oil cooler & condenser screens.

ferg

this guy on ebay, wants me to call him to pay over phone his name is (azpartsexpressonline) when i tryed to pay for the front dam its saying i payed already and he wants me to call, did anyone hear about
something like this before?

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=