Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Cooling fan replacement

Thread Tools
 
Rate Thread
 
Old Jul 11, 2010 | 05:36 PM
  #2  
Winning 8's Avatar
Hot Pit
 
Joined: Jul 2005
Posts: 658
Likes: 0
From: Castro Valley, CA
you could get it out from the top, but need to remove more things to get to, like the battery, and in take box....
Reply
Old Jul 11, 2010 | 05:45 PM
  #4  
nuke0907's Avatar
Never Blend In
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,524
Likes: 5
From: Summerville, SC
yes it will come out the top. you might need to take the undertray out too anyways to get the bottom bolts off.
Reply
Old Jul 11, 2010 | 05:58 PM
  #5  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 36
From: Planet Earth
you can get it out from top. but its more pain in the *** than trying to pull it out from the bottom.

this comes from a guy (me) that has pulled/install his 8's radiator 3 times.
Reply
Old Jul 11, 2010 | 07:09 PM
  #7  
nycgps's Avatar
Out of NYC
iTrader: (1)
 
Joined: Jun 2005
Posts: 19,881
Likes: 36
From: Planet Earth
Originally Posted by GeorgiaBII
Problem is I don't have a garage to work in... Just yard and gravel driveway. If possible I want to avoid going under it to do this.
you just need 4 jack stand and u can do it.

its pretty time consuming especially if u have never done it b4, but ahh its a good thing to do, get a few cold beer, have a few friends around to bs with u. not a bad way to spend an afternoon.
Reply
Old Jul 11, 2010 | 08:43 PM
  #8  
Nemesis8's Avatar
Bigus Rotus
iTrader: (3)
 
Joined: Jun 2004
Posts: 8,573
Likes: 1
From: Missouri
I did mine from below - far easier
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RX-Tuner
RX8Performance
196
Apr 16, 2023 02:19 AM
drebbrnator
Series I Trouble Shooting
11
Dec 27, 2018 07:02 PM
rotorocks
Series I Tech Garage
47
May 11, 2016 03:23 PM
RA32425
Series I Engine Tuning Forum
10
Sep 8, 2015 08:53 AM
Nisaja
New Member Forum
2
Aug 6, 2015 01:27 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:35 PM.