2nd Gear Grinding
#1
Registered
Thread Starter
Join Date: Apr 2004
Location: Fort Smith, Ar
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gear Grinding
I searched but one result was found, Has anyone had any problems going into 2nd gear fast and grinding it... I read where there is a solution but would it be hard to put on
http://www.rx7.com/store/rx8/rx8drivetrain_clutch.html
http://www.rx7.com/store/rx8/rx8drivetrain_clutch.html
#2
Registered
Join Date: Aug 2002
Location: Navarre, FL
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Good find, dude. I didn't know that part was available. I had the 2nd gear frind for a while, but not lately. Either I changed my seat position, tranny is more broken-in, or have been subconsciously "abolutely flooring" the clutch on 2nd gear...
#4
I have done some thinking on this one and analyzed my own shifting techique. I have had some problems with quick-shifting and have come to this conclusion; if we push the clutch pedal in just a few tenths of a second before we actually move the shifter things go smoother. I have also paid more attention to the techniques discussed in roadracing articles and they seem to improve my shifting.
Charles
Charles
Thread
Thread Starter
Forum
Replies
Last Post
nowakm99
Series II Technical and Trouble shooting
1
10-09-2015 07:10 AM