Any chips that re-program the shift paddles?
Thread Starter
Registered
Joined: May 2013
Posts: 13
Likes: 0
Any chips that re-program the shift paddles?
I'm curious if any of the ECU tunes out there converts the left paddle into a proper downshift, eliminating the need to use the buttons. I'm not a fan of the buttons and not sure how I would enjoy using them.
Registered
Joined: Apr 2011
Posts: 49
Likes: 0
From: Cowtown
You can get the wiring diagram in the FSM - Part 13, Section H1.
Both down switches as wired from ground, in parallel, through a resistor to a terminal on the TCM.
Both up switches are also wired from ground, in parallel, through a resistor to the same terminal on the TCM.
So, An ECU modification can NOT alter the way the switches work. To get the effact you desire, you would need to rewire the up switches (and possibly modify the down switches).
Both down switches as wired from ground, in parallel, through a resistor to a terminal on the TCM.
Both up switches are also wired from ground, in parallel, through a resistor to the same terminal on the TCM.
So, An ECU modification can NOT alter the way the switches work. To get the effact you desire, you would need to rewire the up switches (and possibly modify the down switches).
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
Sep 30, 2015 01:53 PM
