strengthening the tranny?
#1
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
strengthening the tranny?
someone over on the rx7 forum said someone in here did it...
come forth and converse with me, that i might have a 6-speed in my fd.
come forth and converse with me, that i might have a 6-speed in my fd.
#4
Riot Controller
Join Date: Jan 2004
Location: Orlando, FL
Posts: 2,142
Likes: 0
Received 0 Likes
on
0 Posts
he took some stuff out and had a machine shop make replacements from a tougher metal..
it was good enough to allow enough power through to snap the rear half=shafts
it was good enough to allow enough power through to snap the rear half=shafts
#8
Registered
Join Date: Mar 2004
Location: El Centro, Ca.
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
The FD tranny is longer than the RX-8 though. Here is the thread about some one putting a FD tranny in a 8. Post 84
https://www.rx8club.com/showthread.p...ny#post1053996
**EDIT actually it looks not to be longer it just that the shifter sit further back.**
Can you move the shifter in a FD tranny?
https://www.rx8club.com/showthread.p...ny#post1053996
**EDIT actually it looks not to be longer it just that the shifter sit further back.**
Can you move the shifter in a FD tranny?
Last edited by hondasr4kids; 06-08-2006 at 10:21 AM.
#9
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
i dunno. i always think the shifters in cars are too far forward, anyway. me = american = i sit farther back than a 5'1 asian dood.
i didn't notice them being 3 inches off. i'll go measure and take pics sometime soon.
i didn't notice them being 3 inches off. i'll go measure and take pics sometime soon.
#10
Okay so for all the people with tranny failures...is it one particular part that has failed for most people, or is it just random things? I've read about transmission failures but no one ever specifies what's broken.
Maybe g-force transmissions could come up with something? Including a taller 6th, ideally.
Maybe g-force transmissions could come up with something? Including a taller 6th, ideally.
Last edited by BaronVonBigmeat; 06-08-2006 at 01:05 PM.
#12
Registered User
Join Date: Jun 2002
Location: Misinformation Director - Evolv Chicago
Posts: 3,086
Likes: 0
Received 0 Likes
on
0 Posts
Was just looking around G-Force's website...see below for the dealer names. I assume this is the same Ibarra rotary drag racer? Just something that caught my eye.
Dealer Near You
United States
East Coast
Philadelphia area
Freddy Fuentes: 267-718-2188
Maryland Area
Paradise Racing
Luis Corujo: 240-508-1449
Email: LuisCorujo@ParadiseRacing.com
West Coast
Abel Ibarra: 909-313-2660
Puerto Rico
Baldorioty Autocentro Sakura: 787-267-5256
Mechanica Vivo (Bam Bam)
Luis Vivo: 787-740-0099
Australia
Pac Performance
Unit 11 / 94 Bryant Street Padstow 2211
NSW Australia
Tel: 61 2 9792 7076
Fax: 61 2 9792 7766
Email: rocky@pacperformance.com.au
Dealer Near You
United States
East Coast
Philadelphia area
Freddy Fuentes: 267-718-2188
Maryland Area
Paradise Racing
Luis Corujo: 240-508-1449
Email: LuisCorujo@ParadiseRacing.com
West Coast
Abel Ibarra: 909-313-2660
Puerto Rico
Baldorioty Autocentro Sakura: 787-267-5256
Mechanica Vivo (Bam Bam)
Luis Vivo: 787-740-0099
Australia
Pac Performance
Unit 11 / 94 Bryant Street Padstow 2211
NSW Australia
Tel: 61 2 9792 7076
Fax: 61 2 9792 7766
Email: rocky@pacperformance.com.au
#14
Registered
If you guys want to get REALLY serious about transmissions, you can spend about $6,000 or so for a custom built T-56 with any gear ratio you want. Adapters to bolt these up to rotaries already exist. Of course you'll also need a different clutch, starter, driveshaft, etc. Then you'll have to figure out the speedometer as the RX-8 tranny doesn't use a cable but rather has a sensor installed that the other trannies don't have. If you could pay for this and get it all worked out, you'll never break another transmission again regardless of what you do to the engine.
EDIT: I now see the link above to G-Force. That's about how much it would cost through them for a custom setup if you are lucky. Not cheap but very nice.
EDIT: I now see the link above to G-Force. That's about how much it would cost through them for a custom setup if you are lucky. Not cheap but very nice.
#17
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
1200 shipped to the 48. if you're in cananada, get a quote and we'll figure it out. oh hell, make an offer. the new engine and turbo stuff cost a LOT more than i thought it did
#18
Originally Posted by guitarjunkie28
1200 shipped to the 48. if you're in cananada, get a quote and we'll figure it out. oh hell, make an offer. the new engine and turbo stuff cost a LOT more than i thought it did
little lower, and i may just take one.
#19
Out of NYC
iTrader: (1)
Originally Posted by guitarjunkie28
i dunno. i always think the shifters in cars are too far forward, anyway. me = american = i sit farther back than a 5'1 asian dood.
The shifter sits closer to the front for a reason. and it has nothing to do with a person's height. Your comment is not even funny.
#20
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
oooow, i think i hit your soft spot. sorry dood, i meant no offense.
fact: the average japanese guy is shorter than the average american guy
fact: it's a japanese car.
i may have illustrated that point in a non-politically correct way, but i meant no offense. stop being so hyper-sensative.
stickman,
18k miles, car hit in rear. make an offer because me = poor. if you want it as a spare, gimme a call so i can help plug it in if you blow yours up. if you just blew yours up, tow that **** up here and i'll plug it in for you. the one i'm definately trying to sell. the other one, i'm not sure yet. might use it, might reallocate the funding for more fd toys.
fact: the average japanese guy is shorter than the average american guy
fact: it's a japanese car.
i may have illustrated that point in a non-politically correct way, but i meant no offense. stop being so hyper-sensative.
stickman,
18k miles, car hit in rear. make an offer because me = poor. if you want it as a spare, gimme a call so i can help plug it in if you blow yours up. if you just blew yours up, tow that **** up here and i'll plug it in for you. the one i'm definately trying to sell. the other one, i'm not sure yet. might use it, might reallocate the funding for more fd toys.
#21
Out of NYC
iTrader: (1)
I know for a fact that average japanese guys are shorter than american guys. oh yes its a japanese car, but does that mean you have the right to call whoever a "dood" ? what makes you so uber special ? and/or superior to anyone else ?
Oh yes lets not forget you're actually talking about a car that was created by a bunch of "doods"
and oh, Im hyper-"SENSITIVE" ? maybe, maybe not.
(ok off topic. Im out)
Oh yes lets not forget you're actually talking about a car that was created by a bunch of "doods"
and oh, Im hyper-"SENSITIVE" ? maybe, maybe not.
(ok off topic. Im out)
#22
脾臓が痛みました
Join Date: Mar 2005
Location: Land of Peaches, Pecans, and Peanuts
Posts: 1,527
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by nycgps
I know for a fact that average japanese guys are shorter than american guys. oh yes its a japanese car, but does that mean you have the right to call whoever a "dood" ? what makes you so uber special ? and/or superior to anyone else ?
Oh yes lets not forget you're actually talking about a car that was created by a bunch of "doods"
and oh, Im hyper-"SENSITIVE" ? maybe, maybe not.
(ok off topic. Im out)
Oh yes lets not forget you're actually talking about a car that was created by a bunch of "doods"
and oh, Im hyper-"SENSITIVE" ? maybe, maybe not.
(ok off topic. Im out)
hypersensative? maybe just a little
#24
port hacker
Thread Starter
Join Date: Nov 2004
Location: socal
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nycgps
oh yes its a japanese car, but does that mean you have the right to call whoever a "dood" ? what makes you so uber special ? and/or superior to anyone else ?
ok, that made absolutely no sense whatsoever. i'm not even gonna ask where that nonsense came from.
wait-- is there a whole other meaning of dood (dude) i should know about?
just take the stick out of your *** and drink a few beers there jackass.