Really simple injector upgrade question
#1
Really simple injector upgrade question
I have a quick question, which despite nearly 2 hours of searching and reading I can not find a solid answer for.
We are installing a upgraded Greddy Turbo kit which included blue upgraded (read: cap ground off) injectors which were flow tested. According to a post by Mazda Maniac, larger injectors should always be installed in the P2 position.
This is diagram shows the P2 injectors as the 2 center injectors on the secondary fuel rail. (FS PF2 PR2 RS)
https://www.rx8club.com/series-i-tech-garage-22/fuel-injector-info-150432/
Am I correct in my placement? This car will be being tuned this Saturday by Mazda Maniac.
(The only reason I ask is the seller of the injectors told the owner to be sure to install them on 1 and 4, not 2+3 due to the tuning issues he had when they were installed.)
Thanks!
Marc@FD3S
We are installing a upgraded Greddy Turbo kit which included blue upgraded (read: cap ground off) injectors which were flow tested. According to a post by Mazda Maniac, larger injectors should always be installed in the P2 position.
This is diagram shows the P2 injectors as the 2 center injectors on the secondary fuel rail. (FS PF2 PR2 RS)
https://www.rx8club.com/series-i-tech-garage-22/fuel-injector-info-150432/
Am I correct in my placement? This car will be being tuned this Saturday by Mazda Maniac.
(The only reason I ask is the seller of the injectors told the owner to be sure to install them on 1 and 4, not 2+3 due to the tuning issues he had when they were installed.)
Thanks!
Marc@FD3S
#2
Official Post Whore
iTrader: (2)
Hey Marc, did not realize you started this thread I asked the same question in our local MM dyno thread (link below). MM replied saying they should be installed as you did. I appreciate you checking on this!
https://www.rx8club.com/showthread.p...68#post3800868
https://www.rx8club.com/showthread.p...68#post3800868
Thread
Thread Starter
Forum
Replies
Last Post
SBGarage
Vendor Classifieds
0
09-06-2015 03:30 PM
Rupanrx
Series I Aftermarket Performance Modifications
1
09-04-2015 06:44 AM