ME maps
06-21-2021, 12:20 PM
#1
Registered
Thread Starter
ME maps
ME = MazdaEdit
ME seems to be the best start for tuning a turbo 13b MSP
ME doesnt have base maps for different applications
SO: how or who has a base map for the BNR upgraded Greddy kit ?
i know ME is tied to the cars vin, but are the maps also ?
ME seems to be the best start for tuning a turbo 13b MSP
ME doesnt have base maps for different applications
SO: how or who has a base map for the BNR upgraded Greddy kit ?
i know ME is tied to the cars vin, but are the maps also ?
Last edited by rob babicki; 06-21-2021 at 02:57 PM.
06-22-2021, 08:34 AM
#2
I'll bump this for you ..
I don't have any experience with ME, that said there is a reason you don't see any "base maps" for specific boosted applications.
In a nut shell there are too many variables between cars, even on those vehicles that are setup identical.
(or this is the tribal experience)
What you might be able to get is a general base map to begin your boosted tuning.
For example this might contain very rich fuel tables and a VE table that seems flat and needs to be adjusted per the application.
Safe Ignition timing, maybe some IAT or Baro base table adjustments.
The list goes on depending on other mods to support the kit
- Injectors
- Dwell
- Maf - always need to calibrate the maf
g/l
I don't have any experience with ME, that said there is a reason you don't see any "base maps" for specific boosted applications.
In a nut shell there are too many variables between cars, even on those vehicles that are setup identical.
(or this is the tribal experience)
What you might be able to get is a general base map to begin your boosted tuning.
For example this might contain very rich fuel tables and a VE table that seems flat and needs to be adjusted per the application.
Safe Ignition timing, maybe some IAT or Baro base table adjustments.
The list goes on depending on other mods to support the kit
- Injectors
- Dwell
- Maf - always need to calibrate the maf
g/l
Last edited by wcs; 06-22-2021 at 08:40 AM.
The following users liked this post:
rob babicki (06-22-2021)
The following users liked this post:
rob babicki (06-23-2021)
06-23-2021, 08:34 AM
#4
Registered
Thread Starter
lol
if i knew everything id not have to spend all the time reading threads from the last 12 years
if i knew everything id not have to spend all the time reading threads from the last 12 years
Thread
Thread Starter
Forum
Replies
Last Post
Crazy Boost
Series I Aftermarket Performance Modifications
8
07-08-2008 03:28 PM