|
Full Bridge, Semi PP Intake And Exhaust Engine Set UP..
Some eye candy Full bridge Semmi Exhaust/Intake set up..
Should have this puppy together couple days.. Thanks Chip U https://cimg0.ibsrv.net/gimg/www.rx8...a80504e29b.jpg https://cimg4.ibsrv.net/gimg/www.rx8...d7c2e4317d.jpg https://cimg1.ibsrv.net/gimg/www.rx8...3953c5174c.jpg https://cimg4.ibsrv.net/gimg/www.rx8...9c76810e59.jpg https://cimg6.ibsrv.net/gimg/www.rx8...74c559290e.jpg https://cimg3.ibsrv.net/gimg/www.rx8...137689a4cd.jpg https://cimg5.ibsrv.net/gimg/www.rx8...8c0265f061.jpg |
You sir. i must say what a privilege it is to be the first person to say WOW. This is exactly what i myself have been intending to do, will you run the side exhaust and side instake as well??
8 intake ports. 6 exhaust( or 5) 13b 13 port. this has 500bhp potential IMO. |
Beautiful!
|
we need more details and pictures!!
|
Shortly to be assembled...
https://cimg3.ibsrv.net/gimg/www.rx8...d275186303.jpg https://cimg4.ibsrv.net/gimg/www.rx8...1f5a2b410e.jpg |
looks like.. exhuast flows to the peri first... taking the brunt of combustion heat.
looks like intake flows from the lower eyebrow first.. interesting. start a kickstarter for a 3 pc shaft and center bearing mods for the intermediate place.. i've got 100 dollars i'll throw your way. just to see the reach a higher potenial.. |
who made those? this is going to be epic
|
well...I just figured out who you are
|
it'll lose low end under 5k rpm but gain up top. interested in dyno once done. will it be NA or force fed?
|
if force induction...I would love to see this matted to a 6466 or s400 even.
|
Originally Posted by neit_jnf
(Post 4744241)
it'll lose low end under 5k rpm but gain up top. interested in dyno once done. will it be NA or force fed?
|
|
Looks good. I bought some old style 13b PP housings years ago to do something similar. Couldn't get a 2 piece shaft, so I shelved it.
Are you keeping the factory 6 port valving? |
Don't understand why you would bridgeport as well as PP ?.... Looks OTT to me ....
|
Originally Posted by reddozen
(Post 4744642)
Looks good. I bought some old style 13b PP housings years ago to do something similar. Couldn't get a 2 piece shaft, so I shelved it.
Are you keeping the factory 6 port valving? |
Very cool stuff!!! Hopefully you'll post up pictures of the intake and exhaust manifold:)
|
Originally Posted by 200.mph
(Post 4744690)
why do you need a 2 piece e shaft?
|
Will post updates as i move along on in... Will like to have some type of valve in the intake, But not sure yet. Depends on the customer..
Final resting place .. Miata ... Chip U |
wastegate on the side ports, just throwing that out there.( variable exhaust valve timing anyone?)
never mind if the exhuast port opens earlier and closes later( which i think yours does.) |
nice stuff
|
very nice
|
sweet!!!
|
Originally Posted by lastphaseofthis
(Post 4744564)
maybe under 3k. you'd be surpised the torque one(13b pp) makes at even 4k rpm. though this is an animal of a completely different breed.
|
looks like when its time to build my 8s motor chip will be building it!
|
Originally Posted by lastphaseofthis
(Post 4744729)
you dont HAVE to have it, but it makes higher rpm power more obtainable. you can rev higher.
200.mph, Basically anything over 10k RPMs and the eshaft will start to flex. This increases the chance of the rotor impacting the housing. If you're running a peripheral port engine that doesn't come alive till say 9k, and is viable to flow air till 12~15k (example only), then you've essentially lost 3~6k on your RPM range. Chip, If you're going to use the factory intake at all including the SSV, know that in my application, the bridge on the secondary causes a surge up the secondaries and makes the SSV chatter like a bad valve. It also deposits some fuel / oil on it from the surge forcing me to clean it yearly because it sticks just like the factory oil blow back issues. Just thought I'd share... |
| All times are GMT -5. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands