Knonfs,
Thank you! Manuel |
Originally Posted by Charles R. Hill
Oh, you're referring to the PPF as well as the axle shafts. I am working on an aluminum PPF but if higher h.p./torque levels become more common I guess I'll have to go back to making a PPF out of Titanium. A bit costly but you know the axiom.... I found a larger rear swaybar to help control wheelhop but I am nowhere near the power you are making.
On the matter of the axles; do you think that Titanium shafts would help? Maybe I just need to get REAL serious about these things I want to make Thanks for the response and info. CRH thanks, CRH Rgonza |
Thanks , Manuel
|
Robert,
Do you have already one of the bosh pumps? Let me know ASAP because on the site that knonfs give us they have it at a good price. I just need to know if you have one, to buy just one more. I would need to see you tomorrow, I'm goin to Wiso shop to see the car and I need to give you the LT12S. If I don't see you I can give the ECU to Wiso or anyone on your house. Thanks, Manuel |
Yes, Manuel just one.
rgonza |
Manuel, you can use this one for the secundary fuel pump, and buy the regular one for primary, youre no have to need to buy two 044 pumps.
Rgonza |
Robert,
I know, remember that I changed the original fuel pump system.................I would show you how is working now. Manuel |
Saludos!!
This car looks great and runs better!!! Awesome!!! Im from Orocovis, P.R. Where you guys from??? |
Braco,
I'm from Manati and Robert is from Naranjito.................. you can check at the top off our messages there is the information from we're we are! Saludos, Manuel |
Yeph.
Quien programa la microtech? |
Hola, Braco66 nosotros hacemos el programa aqui.
|
Wow!
|
Sometimes I wish I knew other laguages... oh well.
|
jenkins,
In Puerto Rico we speak "spanglish"! Sometimes is better to speak two bad languages than just one.......... Braco ask, who programs the microtech........... Manuel |
20B 3 Rotor RX 8 Clutch Assy.
1 Attachment(s)
Manuels'
In this site http://www.vividracing.com/catalog/p...ducts_id/10623 you will find the info of this clutch. This is the unit that i already odered. And this unit is easy to drive in streets and the tracks. The Major concern is the lead time too much time for deliver not from this store i purshased from dynespeed. :dunno: |
Originally Posted by RX8PR
jenkins,
In Puerto Rico we speak "spanglish"! Sometimes is better to speak two bad languages than just one.......... l |
LOL, thanks for the translation :D:
|
Robert,
Rotary extreme sales the twin plate and the triple plate............. http://www.rotaryextreme.com/fdclutch.html I'm also checking other options. Ask we talk, I'm goin to see "Galdy" this Saturday I'm goin to talk about what he thinks and recommends........... Manuel |
Manuels,
Thanks, but their not mentioned (EXEDY) about the torque capacity for the twins or triple plates. i'm already knows (Torque Capacity) for the triple one. Rgonza |
4 Attachment(s)
Manuel,
In this pic you'll see we're the primarie pump is located. :tear: |
When I see the last pictures, looks like someone is cleaning a few parts.
Galdy gift me the pulley for the pump............... I think that I'm goin to Wiso's shop tomorrow, I would need to take a few pictures of the fuel system and probably take it the system with me. Do you have the 3 rotor dummy engine at your house/shop? Thanks, Manuel |
yes, i have dummy motor in my house for aluminum crankcase fabrication.
|
2 Attachment(s)
Crankcase fabrication progress :)
|
Rob, did you use the stock 20B oil pan in your RX-8? Any modifications done to the subframe?
|
Originally Posted by R.P.M.
Rob, did you use the stock 20B oil pan in your RX-8? Any modifications done to the subframe?
Yes i'm still using the stock 20B Oil pan but when i'm installed this it is 1 1/2" more deeper than the stock renesis. i'm going to fabricate an aluminum one with 1 1/2" less than the 20B stock. For the subframe you'll need to modificate it. i can send to you a pics of this mods in the subframe, it's easy to modificate if you have some welding skills. :) rgonza |
All times are GMT -5. The time now is 06:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands