wire label for line output converter
05-24-2005, 11:12 AM
#1
Registered User
Thread Starter
Join Date: Aug 2003
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
wire label for line output converter
just wanted to know if the wires going into the bose amp is labled ( left speaker, right speaker, ground, etc etc). I'm planning on installing an amp using line output converters. I did a search but the pictures are all missing from threads that explain how its done. Any help is much appreciated 
05-24-2005, 03:15 PM
#3
Registered User
Thread Starter
Join Date: Aug 2003
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
i'm no car expert, but what i am planning on adding is an amp. Is there any other way to add an amp wiht out getting an LOC? i know some amps come high inputs but figured that RCA's would be much cleaner looking.
05-25-2005, 08:21 AM
#5
Registered User
Thread Starter
Join Date: Aug 2003
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
how many jigawatts of power would i need to power the flux capacitor then? =) you just lost me there. there was an old thread with a wire diagram but the pictures are now missing. anyone happen to save them on thier computers?
05-25-2005, 01:49 PM
#6
Registered User
Actually the hi-lo built in converters are active circuits and are usually superior to the Line Output Converters that have to use a transformer which may add distortion at low frequencies and could limit high frequency response.
The hi-lo converter and auto-on function of my MTX amp works great.
If the amp you get has speaker level inputs, at least try them first then go LOC if you have to.
-Mr. Wigggles
The hi-lo converter and auto-on function of my MTX amp works great.
If the amp you get has speaker level inputs, at least try them first then go LOC if you have to.
-Mr. Wigggles
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
3
09-10-2015 08:07 AM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM
